2010 Mazda 3 Automatic Transmission Fluid Capacity: All You Need to Know

2010 Mazda 3 Automatic Transmission Fluid Capacity

When it comes to maintaining your 2010 Mazda 3, one of the essential tasks is checking and changing the automatic transmission fluid. This fluid is responsible for lubricating the transmission and ensuring smooth gear shifts. If you’re wondering about the transmission fluid capacity for your Mazda 3, you’ve come to the right place. Let’s dive straight into the details without any unnecessary fluff.

Transmission Fluid Capacity and Type

Before we get into the nitty-gritty, let’s take a look at the transmission fluid capacity for the 2010 Mazda 3. The table below provides you with the necessary information:

Transmission Fluid Type Capacity (Quarts) Capacity (Liters)
Mazda FZ 7.4 7.0

The 2010 Mazda 3 requires Mazda FZ transmission fluid, and the total capacity for a complete fluid change is approximately 7.4 quarts or 7.0 liters. It’s important to use the specified fluid type and adhere to the recommended capacity to ensure optimal performance and longevity of your transmission.

Changing the Transmission Fluid

Now that you know the transmission fluid capacity, let’s briefly discuss how to change the fluid in your 2010 Mazda 3. Remember, if you’re not confident in performing this task yourself, it’s always best to seek professional assistance.

  1. Ensure your vehicle is parked on a level surface and the engine is cool.
  2. Locate the transmission fluid dipstick, which is usually labeled and located near the engine bay.
  3. Using a suitable tool, remove the dipstick and wipe it clean with a lint-free cloth.
  4. Reinsert the dipstick fully and remove it again to check the fluid level. The fluid should be within the designated range on the dipstick. If it’s low, you’ll need to add fluid.
  5. If a fluid change is required, locate the transmission fluid drain plug underneath the vehicle. Place a drain pan beneath it to catch the old fluid.
  6. Remove the drain plug and allow the old fluid to drain completely.
  7. Once drained, reinstall the drain plug and tighten it securely.
  8. Locate the transmission fluid fill plug, which is typically located on the side of the transmission.
  9. Using a suitable funnel, carefully pour the recommended amount of Mazda FZ transmission fluid into the fill hole.
  10. Reinstall the fill plug and ensure it is tightened properly.
  11. Start the engine and allow it to idle for a few minutes.
  12. With the engine still running, check the transmission fluid level using the dipstick. Add more fluid if necessary.
  13. Finally, clean up any spills and dispose of the old fluid responsibly.

Remember, always consult your vehicle’s owner’s manual for specific instructions and safety precautions when performing any maintenance tasks.

Now that you have the transmission fluid capacity for your 2010 Mazda 3 and a general idea of how to change the fluid, you can confidently maintain your vehicle’s transmission. Regularly checking and changing the transmission fluid will help keep your Mazda 3 running smoothly and efficiently for years to come.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top