2013 Ford Escape Transmission Fluid Capacity: A Guide to Proper Maintenance

2013 Ford Escape Transmission Fluid Capacity

Introduction

If you’re a proud owner of a 2013 Ford Escape, it’s essential to keep your vehicle’s transmission running smoothly. One crucial aspect of transmission maintenance is ensuring that you have the correct amount of transmission fluid. In this article, we will discuss the transmission fluid capacity for the 2013 Ford Escape, providing you with the information you need to keep your vehicle in top shape.

Transmission Fluid Capacity and Type

To properly maintain your 2013 Ford Escape’s transmission, it’s crucial to know the correct transmission fluid capacity and type. Here is a table that outlines the transmission fluid capacity in both quarts and liters:

Transmission Fluid Capacity Quarts Liters
6F35 6-speed automatic transmission 9.5 quarts 9.0 liters

The 2013 Ford Escape is equipped with a 6F35 6-speed automatic transmission, which requires approximately 9.5 quarts or 9.0 liters of transmission fluid. It’s crucial to ensure that you use the correct amount of fluid to prevent any potential issues with your transmission.

Transmission Fluid Maintenance

Maintaining the proper transmission fluid level is vital for the longevity and performance of your 2013 Ford Escape. Here are a few essential steps to follow when checking or changing your transmission fluid:

  1. Park your vehicle on a level surface and engage the parking brake.
  2. Locate the transmission fluid dipstick, usually labeled and located near the engine.
  3. With the engine warmed up and running, pull out the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level. The dipstick will have markings indicating the proper fluid level range.
  5. If the fluid level is below the recommended range, add the necessary amount of transmission fluid. Be sure to use the correct type of fluid recommended by Ford for the 2013 Escape.
  6. Repeat the process until the fluid level is within the recommended range.
  7. Once the fluid level is correct, securely reinsert the dipstick.

Safety Considerations

While checking or changing your transmission fluid, it’s important to prioritize safety. Here are a few safety considerations to keep in mind:

  • Always park your vehicle on a level surface and engage the parking brake to prevent any accidental movement.
  • Allow your engine to warm up before checking the fluid level to ensure an accurate reading.
  • Be cautious of hot engine components and avoid touching them to prevent burns.
  • Use caution when working with transmission fluid, as it may be harmful if it comes into contact with your skin or eyes. If any spills occur, clean them up promptly.

Conclusion

Maintaining the proper transmission fluid level is crucial for the optimal performance and longevity of your 2013 Ford Escape. By following the recommended transmission fluid capacity and type, as well as the necessary maintenance steps, you can ensure that your vehicle’s transmission operates smoothly. Remember to prioritize safety during the process, and if you have any concerns or questions, consult your vehicle’s owner’s manual or a qualified mechanic.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top