2018 Chevy Cruze Transmission Fluid Capacity: A Straightforward Guide

2018 Chevy Cruze Transmission Fluid Capacity

If you’re a proud owner of a 2018 Chevy Cruze, it’s important to know the ins and outs of your vehicle. One crucial aspect is understanding the transmission fluid capacity. In this article, we’ll provide you with all the information you need, without any sugarcoating.

Transmission Fluid Capacity and Type

To keep your Chevy Cruze running smoothly, you need to ensure you have the right amount and type of transmission fluid. Here’s a straightforward table that outlines the transmission fluid capacity in both quarts and liters:

Transmission Fluid Capacity Quarts Liters
Automatic Transmission 6.9 quarts 6.5 liters
Manual Transmission 2.4 quarts 2.3 liters

Transmission Fluid Replacement

Now that you know the capacity, let’s discuss how to replace the transmission fluid in your 2018 Chevy Cruze. Here are the steps you need to follow:

  1. Make sure your vehicle is parked on a level surface and the engine is turned off.
  2. Locate the transmission fluid dipstick. It is usually labeled and can be found near the back of the engine compartment.
  3. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level. The fluid should be within the “Full” or “Max” range on the dipstick.
  5. If the fluid level is low, you will need to add the appropriate amount of transmission fluid. Refer to the table above to determine the correct capacity for your specific transmission.
  6. Use a funnel to pour the transmission fluid into the dipstick tube. Be careful not to overfill.
  7. After adding the fluid, recheck the level using the dipstick. Repeat the process until the fluid level is within the recommended range.
  8. Once you’re satisfied with the fluid level, securely reinsert the dipstick and close the hood of your Chevy Cruze.
  2018 Chevy Malibu Transmission Fluid Capacity: A Guide for Maintenance

Safety Considerations

While replacing the transmission fluid is a relatively simple task, it’s important to prioritize safety. Here are a few crucial safety considerations:

  • Always wear protective gloves and eyewear to prevent any contact with the fluid.
  • Ensure the vehicle is parked on a level surface to avoid any accidents or spills.
  • Allow the engine to cool down before attempting to check or add transmission fluid.
  • Use the recommended type of transmission fluid specified in your vehicle’s owner’s manual.
  • If you’re unsure or uncomfortable performing the fluid replacement yourself, it’s best to consult a professional mechanic.

Now that you have all the information you need about the 2018 Chevy Cruze transmission fluid capacity, you can confidently maintain your vehicle’s performance. Remember to follow the steps and safety considerations outlined in this article, and your Chevy Cruze will continue to run smoothly for miles to come.

  2007 Silverado Transmission Fluid Capacity: A Guide to Maintenance

What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top