2018 Chevy Traverse Transmission Fluid Capacity: A Crucial Maintenance Aspect

2018 Chevy Traverse Transmission Fluid Capacity

When it comes to maintaining your 2018 Chevy Traverse, one crucial aspect that often gets overlooked is the transmission fluid. Ensuring that your transmission is properly lubricated with the right amount of fluid is essential for the smooth operation and longevity of your vehicle. In this article, we will discuss the transmission fluid capacity for the 2018 Chevy Traverse, providing you with the information you need to keep your vehicle running smoothly.

Transmission Fluid Capacity and Type

Before we dive into the specifics, let’s get straight to the point. The transmission fluid capacity for the 2018 Chevy Traverse varies depending on the type of transmission your vehicle has. Here’s a breakdown:

Transmission Type Fluid Capacity (Quarts) Fluid Capacity (Liters)
9-Speed Automatic 9.5 quarts 9.0 liters
6-Speed Automatic 6.9 quarts 6.5 liters

Now that we have the numbers out of the way, let’s talk about why this information is important.

Why Transmission Fluid Capacity Matters

Transmission fluid is responsible for lubricating the various components within your vehicle’s transmission system. It helps to reduce friction, dissipate heat, and ensure smooth gear shifting. If your transmission fluid level is too low, it can lead to inadequate lubrication, increased friction, and potential damage to your transmission.

  2011 Malibu Transmission Fluid Capacity: A Guide to Maintaining Optimal Performance

On the other hand, overfilling your transmission with fluid can also cause problems. Excess fluid can lead to foaming, which can affect the fluid’s ability to properly lubricate and cool the transmission components. It’s crucial to maintain the correct fluid level to ensure optimal performance and avoid costly repairs.

Checking and Adding Transmission Fluid

If you suspect that your transmission fluid level is low, it’s important to check and add fluid as needed. Here’s a simple step-by-step guide:

  1. Make sure your vehicle is parked on a level surface and the engine is turned off.
  2. Locate the transmission fluid dipstick, typically labeled and located near the engine.
  3. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level.
  5. If the fluid level is below the “Add” or “Min” mark, you’ll need to add fluid.
  6. Using a funnel, slowly pour the recommended transmission fluid into the dipstick tube.
  7. Check the fluid level again to ensure it is within the appropriate range.
  8. Replace the dipstick securely.
  2007 Chevy Express 2500 Transmission Fluid Capacity: A Crucial Maintenance Guide

Remember, always refer to your vehicle’s owner’s manual for specific instructions and recommendations regarding transmission fluid type and capacity. It’s crucial to use the correct fluid to avoid potential damage to your transmission.


Knowing the transmission fluid capacity for your 2018 Chevy Traverse is essential for maintaining the health and performance of your vehicle’s transmission. By following the recommended fluid capacity and regularly checking and adding fluid as needed, you can ensure that your transmission operates smoothly and efficiently for years to come. Remember, when it comes to transmission fluid, it’s better to be blunt and straightforward than to sugarcoat the importance of proper maintenance.


What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top