Subaru Manual Transmission Fluid Capacity: A Guide for Optimal Performance

Subaru Manual Transmission Fluid Capacity

When it comes to maintaining your Subaru’s manual transmission, one important aspect to consider is the fluid capacity. Knowing the correct amount of transmission fluid to use is crucial for optimal performance and longevity of your vehicle. In this article, we will provide you with the necessary information on Subaru manual transmission fluid capacity, so you can keep your car running smoothly.

Transmission Fluid Capacity and Type

Before we dive into the specifics, let’s take a look at the recommended transmission fluid capacity for various Subaru models:

Model Fluid Capacity (Quarts) Fluid Capacity (Liters)
Impreza 3.7 3.5
Legacy 3.7 3.5
Outback 3.7 3.5
Forester 3.7 3.5
Crosstrek 3.7 3.5

Now that you know the fluid capacity, let’s discuss the type of transmission fluid you should use. Subaru recommends using their own Genuine Subaru Manual Transmission Fluid, also known as Subaru Extra MT. This fluid is specifically formulated to meet the requirements of Subaru manual transmissions and provides optimal lubrication and protection.

  2017 Subaru Impreza Transmission Fluid Capacity and Maintenance Guide

How to Check and Add Transmission Fluid

If you find that your transmission fluid level is low or you need to replace the fluid, follow these steps:

  1. Ensure your vehicle is on a level surface and the engine is turned off.
  2. Locate the transmission fluid dipstick, which is usually labeled and located near the back of the engine compartment.
  3. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully into the transmission and then remove it again.
  5. Check the fluid level on the dipstick. The fluid should be within the “Full” or “Max” range.
  6. If the fluid level is low, carefully add small amounts of the recommended transmission fluid until it reaches the proper level. Be cautious not to overfill.
  7. Recheck the fluid level and ensure it is within the recommended range.
  8. Securely reinsert the dipstick and close the hood of your vehicle.
  2015 Subaru Forester Transmission Fluid Capacity: Blunt and Straightforward Guide

Remember, it is essential to follow the manufacturer’s recommendations and use the correct fluid type and capacity for your Subaru’s manual transmission. Using the wrong fluid or overfilling can lead to transmission damage and costly repairs.

By maintaining the proper transmission fluid level, you can ensure smooth gear shifts, reduce wear and tear on your transmission components, and prolong the life of your Subaru. So, take the time to check and replenish your manual transmission fluid regularly, and your Subaru will thank you with reliable performance.

What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top