2007 Ford Edge Transmission Fluid Capacity: A Guide to Maintenance

2007 Ford Edge Transmission Fluid Capacity

When it comes to maintaining your 2007 Ford Edge, one important aspect you shouldn’t overlook is the transmission fluid. Properly maintaining the transmission fluid can help ensure smooth shifting, extend the life of your transmission, and prevent costly repairs down the road. In this article, we’ll dive into the transmission fluid capacity for the 2007 Ford Edge, so you can keep your vehicle running smoothly.

Transmission Fluid Capacity and Type

Before we get into the nitty-gritty details, let’s start with the basics. The 2007 Ford Edge requires a specific amount of transmission fluid to function optimally. The transmission fluid capacity for this vehicle can be found in the table below:

Transmission Fluid Capacity Quarts Liters
6-Speed Automatic Transmission (6F50) 13.9 13.1

Now that you know the transmission fluid capacity, let’s talk about the type of fluid you should use. For the 2007 Ford Edge with the 6-speed automatic transmission (6F50), it is recommended to use Mercon LV automatic transmission fluid. Using the correct type of fluid is crucial to maintain the performance and longevity of your transmission.

How to Check and Add Transmission Fluid

Checking and adding transmission fluid is a relatively simple process that you can do yourself. However, it’s important to exercise caution and follow safety guidelines. Here’s a step-by-step guide to help you:

  1. Park your vehicle on a level surface and engage the parking brake.
  2. Locate the transmission fluid dipstick. It is usually labeled and can be found near the back of the engine bay.
  3. With the engine warmed up and running, shift through all the gears and then put the transmission in park.
  4. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  5. Reinsert the dipstick fully and then remove it again to check the fluid level. The fluid should be within the designated “Full” range.
  6. If the fluid level is low, use a funnel to add small amounts of the recommended transmission fluid. Check the level frequently to avoid overfilling.
  7. Repeat steps 4 and 5 until the fluid level is within the proper range.
  8. Once you’re satisfied with the fluid level, securely reinsert the dipstick.

Remember, it’s crucial to follow the manufacturer’s recommendations and guidelines when it comes to checking and adding transmission fluid. If you’re unsure or uncomfortable performing this task yourself, it’s always best to consult a professional mechanic.

Conclusion

Knowing the transmission fluid capacity for your 2007 Ford Edge is essential for proper maintenance. By using the correct amount and type of fluid, you can help ensure the longevity and performance of your transmission. Remember to check the fluid level regularly and add fluid as needed, following the recommended guidelines. By taking care of your transmission, you’ll be able to enjoy smooth shifting and avoid costly repairs in the future.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top