2007 Yaris Transmission Fluid: Capacity and Maintenance Guide

2007 Yaris Transmission Fluid Capacity

When it comes to taking care of your 2007 Yaris, one important maintenance task is checking and changing the transmission fluid. The transmission fluid plays a crucial role in keeping your car’s transmission running smoothly, so it’s essential to know the correct capacity and type of fluid to use. In this article, we’ll provide you with all the information you need to keep your Yaris’s transmission in top shape.

Transmission Fluid Capacity and Type

Before we dive into the details, let’s start with the basics: the transmission fluid capacity and type for a 2007 Yaris. Here’s a handy table that provides you with the necessary information:

Transmission Fluid Type Capacity (Quarts) Capacity (Liters)
Automatic Transmission Fluid (ATF) Type T-IV 3.2 3.0
Manual Transmission Fluid (MTF) API GL-4 or GL-5 1.9 1.8

Now that you know the correct type and capacity, let’s move on to the steps involved in changing the transmission fluid.

Changing the Transmission Fluid

  1. Make sure your Yaris is parked on a level surface and the engine is turned off.
  2. Locate the transmission fluid dipstick. It is usually labeled and can be found near the back of the engine compartment.
  3. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level. The transmission fluid should be between the “Full” and “Add” marks on the dipstick. If it’s below the “Add” mark, you’ll need to add more fluid.
  5. If you need to add fluid, remove the transmission fluid fill plug, which is typically located on the side of the transmission. Use a funnel to pour the fluid into the fill hole until it reaches the correct level.
  6. Once you’ve added the necessary amount of fluid, replace the fill plug and dipstick securely.
  7. Start your Yaris’s engine and let it idle for a few minutes to warm up the transmission fluid.
  8. With the engine still running, shift through each gear position (P, R, N, D, etc.) and then return to Park (P).
  9. Check the transmission fluid level again using the dipstick. Ensure it is within the recommended range.
  10. If the fluid level is still low, repeat the process of adding fluid until it reaches the proper level.
  Toyota Sequoia Transmission Fluid Capacity and Maintenance Guide

Remember, it’s crucial to follow the manufacturer’s recommendations and use the correct type and capacity of transmission fluid for your 2007 Yaris. Neglecting this maintenance task can lead to transmission problems and costly repairs down the road. So, be proactive and keep your Yaris running smoothly by taking care of its transmission fluid.

Now that you have all the information you need, go ahead and give your Yaris the attention it deserves. Your car will thank you with smooth and reliable performance for years to come!


  2018 Toyota Camry Transmission Fluid Capacity: A Guide for Maintenance

What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top