2008 Chevy Uplander Transmission Fluid Capacity: A Guide to Maintaining Your Vehicle

2008 Chevy Uplander Transmission Fluid Capacity

When it comes to maintaining your 2008 Chevy Uplander, one crucial aspect is ensuring that the transmission fluid is at the right level. In this article, we will dive into the transmission fluid capacity for your Uplander, providing you with the information you need to keep your vehicle running smoothly.

Transmission Fluid Capacity and Type

Before we get into the nitty-gritty details, let’s start with the basics. The transmission fluid capacity for a 2008 Chevy Uplander depends on the type of transmission your vehicle has. Here’s a breakdown:

Transmission Type Fluid Capacity (Quarts) Fluid Capacity (Liters)
4-Speed Automatic 11.4 10.8
6-Speed Automatic 11.4 10.8

Now that you know the transmission fluid capacity for your Uplander, let’s move on to the next steps.

Checking and Adding Transmission Fluid

It’s important to regularly check your transmission fluid to ensure it’s at the proper level. Here’s how you can do it:

  1. Start your Uplander and let the engine warm up for a few minutes.
  2. Locate the transmission dipstick. It is usually labeled and can be found near the back of the engine compartment.
  3. With the engine still running, pull out the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then pull it out again.
  5. Check the fluid level on the dipstick. It should be within the “Full” or “Hot” range.
  6. If the fluid level is low, you will need to add transmission fluid. Use a funnel to pour the fluid into the dipstick tube. Be careful not to overfill.
  7. Repeat the dipstick checking process to ensure the fluid level is now within the appropriate range.

Remember, it’s crucial to use the correct type of transmission fluid recommended for your Uplander. Refer to your vehicle’s owner’s manual or consult with a professional if you’re unsure about the right fluid to use.


Keeping your 2008 Chevy Uplander’s transmission fluid at the proper level is essential for maintaining the longevity and performance of your vehicle. By following the steps outlined in this article and using the correct fluid capacity, you can ensure that your Uplander continues to run smoothly for years to come. Stay on top of your maintenance and enjoy the ride!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top