2008 Ford F350 6.4 Diesel Transmission Fluid Capacity: A Comprehensive Guide

2008 Ford F350 6.4 Diesel Transmission Fluid Capacity

If you’re a proud owner of a 2008 Ford F350 6.4 Diesel, you probably know that keeping up with regular maintenance is crucial to keep your beast running smoothly. One important aspect of maintenance is ensuring that your transmission fluid is at the right level. In this article, we’ll dive into the nitty-gritty details of the transmission fluid capacity for your truck, so you can get the job done without any fuss.

Transmission Fluid Capacity and Type

To avoid any confusion, let’s get straight to the point. The transmission fluid capacity for a 2008 Ford F350 6.4 Diesel is approximately 17 quarts or 16 liters. Yes, you read that right, it’s a hefty amount. So, make sure you have enough fluid on hand before you start the process.

Now, let’s talk about the type of transmission fluid you should use. Ford recommends using Mercon LV automatic transmission fluid for your 6.4 Diesel. Stick to this recommendation to ensure optimal performance and longevity of your transmission.

  2012 Ford Explorer Transmission Fluid Capacity: A Guide to Maintenance

How to Check and Add Transmission Fluid

Checking and adding transmission fluid to your 2008 Ford F350 6.4 Diesel is a relatively straightforward process. Here’s a step-by-step guide to help you get the job done:

  1. Park your truck on a level surface and engage the parking brake. Safety first!
  2. Locate the transmission dipstick. It’s usually labeled and can be found near the back of the engine compartment.
  3. With the engine warmed up and running, pull out the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then pull it out again to check the fluid level.
  5. If the fluid level is below the “Add” mark on the dipstick, it’s time to add some fluid.
  6. Remove the transmission fill plug, which is located on the side of the transmission pan.
  7. Using a suitable funnel, slowly pour the recommended Mercon LV transmission fluid into the fill plug opening.
  8. Check the fluid level again using the dipstick. Repeat the process until the fluid level reaches the “Full” mark.
  9. Once you’re satisfied with the fluid level, securely tighten the fill plug.
  2006 Ford E250 Transmission Fluid Capacity: A Guide to Proper Maintenance

Remember, it’s crucial to follow these steps carefully and use the recommended transmission fluid. Neglecting proper maintenance can lead to costly repairs down the road, and nobody wants that.

Conclusion

Now that you know the transmission fluid capacity for your 2008 Ford F350 6.4 Diesel, you can confidently tackle this maintenance task. Remember, it’s always better to be proactive and keep your truck in top shape rather than dealing with avoidable issues later on. So, grab that Mercon LV transmission fluid, follow the steps, and keep your F350 running smoothly for years to come.

Author

What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top