2008 Honda Civic Automatic Transmission Fluid Capacity: Complete Guide

2008 Honda Civic Automatic Transmission Fluid Capacity

In order to properly maintain your 2008 Honda Civic’s automatic transmission, it is important to know the correct fluid capacity. This article will provide you with the necessary information to ensure that you are using the right amount of transmission fluid for your vehicle.

Popular posts
What to do to prolong the life of your manual gearbox
Automatic transmission: what it is, how it works

Transmission Fluid Capacity and Type

Before we dive into the details, let’s first take a look at the transmission fluid capacity and type for the 2008 Honda Civic:

Transmission Fluid Capacity (Quarts) Capacity (Liters)
Honda ATF DW-1 3.9 3.7

Now that you know the correct transmission fluid capacity, let’s move on to the steps you need to follow to ensure a smooth and successful fluid change.

Fluid Change Procedure

  1. Make sure your vehicle is parked on a level surface and the engine is turned off.
  2. Locate the transmission fluid dipstick, which is usually labeled and can be found near the back of the engine bay.
  3. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level. The fluid should be between the “MIN” and “MAX” marks on the dipstick. If it is below the “MIN” mark, you will need to add more fluid.
  5. If you need to add fluid, remove the fill plug located on the side of the transmission. Use a funnel to pour the transmission fluid into the fill hole until it reaches the proper level on the dipstick.
  6. Once you have reached the correct fluid level, reinsert the dipstick and secure it in place.
  7. Start the engine and let it idle for a few minutes to allow the transmission fluid to circulate.
  8. With the engine still running, shift through each gear position (P, R, N, D, etc.) and then return the shifter to the “Park” position.
  9. Turn off the engine and check the fluid level once again. Adjust if necessary.
  10. Dispose of the used transmission fluid properly, following local regulations and guidelines.
  2012 Honda CR-V Transmission Fluid Capacity: Everything You Need to Know

Remember, it is crucial to follow these steps carefully to ensure the proper functioning of your transmission. Neglecting to maintain the correct fluid level can lead to transmission damage and costly repairs.

While performing a transmission fluid change, it is important to prioritize your safety. Always wear protective gloves and eyewear to avoid contact with the fluid. Additionally, ensure that the vehicle is properly supported and secure to prevent accidents or injuries.

By following these guidelines and using the correct transmission fluid capacity, you can keep your 2008 Honda Civic’s automatic transmission running smoothly and efficiently for years to come.

  2016 Honda Odyssey Transmission Fluid Capacity: A Guide for Maintenance

Author

What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top