2008 Honda Civic Si Transmission Fluid Capacity and Maintenance Guide

2008 Honda Civic Si Transmission Fluid Capacity

When it comes to maintaining your 2008 Honda Civic Si, one important aspect that often gets overlooked is the transmission fluid. Properly maintaining the transmission fluid can help ensure smooth gear shifts and extend the lifespan of your transmission. In this article, we will discuss the transmission fluid capacity for the 2008 Honda Civic Si, so you can keep your car running smoothly.

Transmission Fluid Capacity and Type

Before we dive into the transmission fluid capacity, let’s first talk about the type of fluid you should be using. For the 2008 Honda Civic Si, Honda recommends using their Genuine Honda Manual Transmission Fluid. This fluid is specifically formulated to meet the requirements of your Civic Si’s transmission, providing optimal performance and protection.

Now, let’s get to the important part – the transmission fluid capacity. The 2008 Honda Civic Si has a total transmission fluid capacity of approximately 2.9 quarts or 2.7 liters. It’s important to note that this capacity includes both the transmission’s main case and the differential. So, when you’re checking or changing the fluid, make sure to take this into account.

Checking and Changing the Transmission Fluid

Now that you know the transmission fluid capacity, let’s discuss how to check and change the fluid in your 2008 Honda Civic Si. Here are the steps you need to follow:

  1. Make sure your car is on a level surface and the engine is turned off.
  2. Locate the transmission fluid dipstick, which is usually labeled and located near the engine bay.
  3. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level.
  5. The fluid level should be between the “MIN” and “MAX” marks on the dipstick. If it’s below the “MIN” mark, you’ll need to add fluid.
  6. To add fluid, remove the fill plug located on the side of the transmission case. Use a funnel to pour the fluid into the fill hole until it reaches the proper level.
  7. Once the fluid level is correct, reinsert the dipstick and make sure it’s securely in place.

It’s important to note that if you’re changing the transmission fluid, it’s recommended to consult your vehicle’s owner’s manual or a trusted mechanic for specific instructions. Changing the fluid may require additional steps, such as removing the drain plug and using a drain pan to catch the old fluid.

Conclusion

Now that you have the transmission fluid capacity for your 2008 Honda Civic Si, you can confidently maintain your car’s transmission. Remember to use Genuine Honda Manual Transmission Fluid and follow the proper steps for checking and changing the fluid. By taking care of your transmission, you’ll ensure smooth gear shifts and prolong the life of your Civic Si. Happy driving!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top