2008 Hyundai Sonata Transmission Fluid Capacity: A Guide to Maintenance

2008 Hyundai Sonata Transmission Fluid Capacity

When it comes to maintaining your 2008 Hyundai Sonata, one crucial aspect is ensuring that the transmission fluid is at the right level. The transmission fluid plays a vital role in keeping your vehicle’s transmission running smoothly and efficiently. In this article, we will discuss the transmission fluid capacity for the 2008 Hyundai Sonata, so you can keep your car in top shape.

Transmission Fluid Capacity and Type

Before we dive into the specifics, let’s talk about the transmission fluid capacity for the 2008 Hyundai Sonata. The transmission fluid capacity varies depending on the type of transmission your Sonata is equipped with. Here’s a breakdown:

Transmission Type Fluid Capacity (Quarts) Fluid Capacity (Liters)
Manual Transmission 2.2 Quarts 2.1 Liters
Automatic Transmission 8.2 Quarts 7.8 Liters

Now that you know the transmission fluid capacity for your 2008 Hyundai Sonata, let’s move on to the next steps to ensure a smooth fluid change.

Steps to Change Transmission Fluid

  1. Make sure your vehicle is parked on a level surface and the engine is turned off.
  2. Locate the transmission fluid dipstick. It is usually labeled and can be found near the engine.
  3. Using a clean cloth or paper towel, remove the dipstick and wipe it clean.
  4. Reinsert the dipstick fully into the transmission and then remove it again to check the fluid level.
  5. Inspect the fluid on the dipstick. It should be transparent and have a reddish color. If it appears dark, dirty, or has a burnt smell, it’s time for a fluid change.
  6. If the fluid needs to be changed, locate the transmission drain plug or pan. This may require raising the vehicle with a jack and using jack stands for safety.
  7. Place a drain pan underneath the transmission drain plug or pan, and carefully remove the plug or pan to drain the old fluid.
  8. Once the old fluid has drained completely, reinstall the drain plug or pan securely.
  9. Using a funnel, add the appropriate amount of new transmission fluid according to the capacity mentioned in the table above.
  10. Recheck the fluid level using the dipstick, ensuring it is within the recommended range.
  11. Finally, start the engine and let it run for a few minutes, shifting through each gear to allow the new fluid to circulate.

Remember, it’s essential to follow the manufacturer’s recommendations and use the correct type of transmission fluid for your 2008 Hyundai Sonata. Regularly checking and maintaining the transmission fluid will help prolong the life of your vehicle’s transmission and ensure optimal performance.

Now that you have the necessary information, go ahead and take care of your 2008 Hyundai Sonata’s transmission fluid. Keep your car running smoothly, and enjoy the open road without any transmission troubles!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top