2008 Jeep Compass Transmission Fluid Capacity: A Crucial Maintenance Task

2008 Jeep Compass Transmission Fluid Capacity

When it comes to maintaining your 2008 Jeep Compass, one of the essential tasks is checking and changing the transmission fluid. The transmission fluid plays a vital role in keeping your vehicle’s transmission running smoothly and efficiently. In this article, we will discuss the transmission fluid capacity for the 2008 Jeep Compass, so you know exactly how much fluid you need to keep things running smoothly.

Transmission Fluid Capacity and Type

Before we dive into the details, let’s take a look at the transmission fluid capacity for the 2008 Jeep Compass. The table below provides the recommended transmission fluid capacity in both quarts and liters:

Transmission Fluid Capacity Quarts Liters
CVT Transmission 8.4 7.9
Manual Transmission 2.0 1.9

Now that you know the transmission fluid capacity for your 2008 Jeep Compass, let’s discuss a few important points to keep in mind when dealing with transmission fluid.

Checking and Changing Transmission Fluid

  • Step 1: Park your Jeep Compass on a level surface and engage the parking brake. Safety first!
  • Step 2: Locate the transmission fluid dipstick. It is usually labeled and can be found near the engine. Refer to your owner’s manual if you’re having trouble finding it.
  • Step 3: With the engine running and the transmission warmed up, pull out the dipstick and wipe it clean with a lint-free cloth or paper towel.
  • Step 4: Reinsert the dipstick fully and then pull it out again. Check the fluid level against the markings on the dipstick. If the fluid level is below the “Add” mark, you need to add more transmission fluid.
  • Step 5: To add transmission fluid, remove the transmission fluid fill plug located on the side of the transmission. Use a funnel to pour the fluid into the fill hole until it reaches the proper level.
  • Step 6: Once you’ve added the necessary amount of transmission fluid, replace the fill plug and tighten it securely.
  • Step 7: Start the engine and let it idle for a few minutes. Shift through all the gears and then put the transmission in park. Recheck the fluid level to ensure it is within the recommended range.

Remember, it’s crucial to use the correct type of transmission fluid recommended by Jeep for your 2008 Compass. Using the wrong fluid can cause damage to your transmission and lead to costly repairs. Always consult your owner’s manual or contact a certified Jeep technician if you are unsure about the type of fluid to use.

By following these steps and keeping an eye on your transmission fluid level, you can help ensure that your 2008 Jeep Compass continues to perform at its best. Regular maintenance, including checking and changing the transmission fluid, is key to keeping your vehicle running smoothly and avoiding unnecessary headaches down the road.

So, don’t neglect your transmission fluid! Take care of your 2008 Jeep Compass, and it will take care of you.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top