2008 Lexus RX 350 Transmission Fluid Capacity: A Guide to Proper Maintenance

2008 Lexus RX 350 Transmission Fluid Capacity

When it comes to maintaining your 2008 Lexus RX 350, one important aspect you shouldn’t overlook is checking and changing the transmission fluid. The transmission fluid plays a crucial role in keeping your vehicle’s transmission system running smoothly. In this article, we will discuss the transmission fluid capacity for the 2008 Lexus RX 350, so you can ensure your vehicle is properly maintained.

Transmission Fluid Capacity and Type

Before we dive into the details, let’s take a look at the transmission fluid capacity and type for the 2008 Lexus RX 350. It’s always important to use the right amount and type of fluid to ensure optimal performance and longevity of your vehicle’s transmission system. Here’s a handy table to guide you:

Transmission Fluid Capacity Quarts Liters
Automatic Transmission (Pan Drop) 4.7 4.4
Automatic Transmission (Overhaul) 10.6 10.0

Now that you know the transmission fluid capacity, let’s move on to the next steps to ensure a smooth fluid change process.

Fluid Change Process

  1. Make sure your vehicle is parked on a level surface and the engine is turned off.
  2. Locate the transmission fluid dipstick. It is usually labeled and can be found near the back of the engine compartment.
  3. Using a clean cloth or paper towel, remove the dipstick and wipe it clean.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level. The fluid should be within the “Hot” range on the dipstick. If it’s below the recommended level, you’ll need to add more fluid.
  5. If a fluid change is necessary, locate the transmission fluid drain plug underneath the vehicle. Place a drain pan underneath to catch the old fluid.
  6. Remove the drain plug and allow the old fluid to drain completely.
  7. Once the old fluid has drained, reinstall the drain plug securely.
  8. Locate the transmission fluid fill plug, which is usually on the side of the transmission.
  9. Using a funnel, carefully pour the recommended amount of transmission fluid into the fill plug. Refer to the table above for the correct capacity.
  10. After adding the fluid, start the engine and let it idle for a few minutes. Then, shift through each gear position, pausing for a few seconds in each, before returning to the Park position.
  11. Check the fluid level again using the dipstick. Add more fluid if necessary to reach the proper level.
  12. Finally, securely reinsert the dipstick and close the hood.

Remember, it’s essential to follow the recommended transmission fluid capacity and type for your 2008 Lexus RX 350. Regularly checking and changing the transmission fluid will help maintain the performance and longevity of your vehicle’s transmission system. Keep your Lexus running smoothly and enjoy the ride!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top