2008 Toyota Camry Transmission Fluid Capacity: A Guide to Proper Maintenance

2008 Toyota Camry Transmission Fluid Capacity

When it comes to maintaining your 2008 Toyota Camry, one important aspect to consider is the transmission fluid. Keeping the right amount of fluid in your transmission is crucial for its smooth operation and longevity. In this article, we will discuss the transmission fluid capacity for the 2008 Toyota Camry, so you can ensure your vehicle is running at its best.

Popular posts
What to do to prolong the life of your manual gearbox
Automatic transmission: what it is, how it works

Transmission Fluid Capacity and Type

Before we dive into the details, let’s get straight to the point. The transmission fluid capacity for the 2008 Toyota Camry varies depending on the type of transmission you have:

Transmission Type Fluid Capacity (Quarts) Fluid Capacity (Liters)
Automatic Transmission (2.4L Engine) 4.2 Quarts 4.0 Liters
Automatic Transmission (3.5L Engine) 6.9 Quarts 6.5 Liters
Manual Transmission 2.6 Quarts 2.5 Liters

Now that you know the capacity, it’s essential to use the right type of transmission fluid for your Camry. For the automatic transmission, Toyota recommends using their genuine ATF Type T-IV fluid. This fluid is specifically designed to meet the requirements of your vehicle’s transmission, ensuring optimal performance and protection.

  2006 Tacoma Transmission Fluid Capacity and Maintenance Guide

For the manual transmission, Toyota recommends using their genuine Manual Transmission Gear Oil or an equivalent API GL-4 or GL-5 gear oil with a viscosity of SAE 75W-90.

How to Check and Add Transmission Fluid

Checking and adding transmission fluid to your 2008 Toyota Camry is a relatively simple process. However, it’s crucial to follow the correct steps to avoid any potential damage or accidents. Here’s a step-by-step guide:

  1. Park your Camry on a level surface and engage the parking brake.
  2. Start the engine and let it idle for a few minutes to warm up the transmission fluid.
  3. Locate the transmission dipstick, usually located near the back of the engine bay.
  4. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  5. Reinsert the dipstick fully and remove it again to check the fluid level.
  6. If the fluid level is below the “Full” mark, you will need to add fluid.
  7. Using a funnel, carefully pour the recommended transmission fluid into the dipstick tube.
  8. Check the fluid level again and repeat the process until it reaches the “Full” mark.
  9. Be cautious not to overfill the transmission, as it can lead to damage.
  10. Once you’re done, securely reinsert the dipstick and close the hood.
  Toyota Forklift Transmission Fluid Capacity: A Guide to Maintaining Your Forklift

Remember, safety is crucial when working with any vehicle components. Always refer to your owner’s manual for specific instructions and precautions related to your 2008 Toyota Camry.


Now you have the transmission fluid capacity for your 2008 Toyota Camry at your fingertips. By maintaining the proper fluid level and using the recommended type, you can ensure smooth shifting, improved performance, and increased longevity for your transmission. Just remember to follow the correct procedures and safety precautions when checking and adding transmission fluid. Keep your Camry running smoothly, and enjoy the ride!


What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top