2010 Acura TSX Transmission Fluid Capacity: A Comprehensive Guide

2010 Acura TSX Transmission Fluid Capacity

If you’re a proud owner of a 2010 Acura TSX, it’s essential to keep your vehicle’s transmission in top-notch condition. One crucial aspect of transmission maintenance is ensuring that the transmission fluid is at the correct level. In this article, we will discuss the transmission fluid capacity for the 2010 Acura TSX, providing you with the information you need to keep your car running smoothly.

Transmission Fluid Capacity and Type

To maintain your Acura TSX’s transmission, you need to know the correct transmission fluid capacity. Here’s a handy table that outlines the fluid capacity in both quarts and liters:

Transmission Fluid Capacity Quarts Liters
Automatic Transmission 3.9 3.7
Manual Transmission 2.9 2.7

Now that you know the transmission fluid capacity for your 2010 Acura TSX let’s dive into some important details and steps to ensure a successful fluid change.

Transmission Fluid Change

Performing a transmission fluid change is a crucial maintenance task that helps prolong the life of your vehicle’s transmission. Here’s a step-by-step guide to help you through the process:

  1. Ensure your vehicle is parked on a level surface and the engine is turned off.
  2. Locate the transmission fluid dipstick, which is usually labeled and located near the engine bay.
  3. Using a clean cloth or paper towel, remove the dipstick and wipe it clean.
  4. Reinsert the dipstick fully and remove it again to check the fluid level. Ensure the fluid is within the recommended range.
  5. If the fluid level is low, you will need to add the appropriate transmission fluid. Refer to the table above for the correct capacity.
  6. Using a funnel, carefully pour the transmission fluid into the dipstick tube. Take your time and avoid overfilling.
  7. After adding the fluid, recheck the level to ensure it is within the recommended range.
  8. Replace the dipstick securely and start your engine. Allow it to idle for a few minutes to warm up the transmission fluid.
  9. With the engine still running, shift through each gear position, pausing for a few seconds in each, including reverse.
  10. Finally, return the gear selector to the park position and recheck the fluid level one last time.
  2008 Acura MDX Transmission Fluid Capacity: Essential Maintenance Guide

Remember, it’s crucial to follow the manufacturer’s recommendations and use the correct type of transmission fluid for your Acura TSX. Consult your owner’s manual or contact a professional if you’re unsure about the appropriate fluid type.

Safety Considerations

While performing a transmission fluid change is relatively straightforward, it’s important to prioritize your safety. Here are a few safety considerations to keep in mind:

  • Always wear protective gloves and eyewear to prevent any contact with the fluid.
  • Ensure the vehicle is securely parked and the parking brake is engaged.
  • Allow the engine and transmission to cool down before attempting any maintenance.
  • Dispose of used transmission fluid responsibly, following local regulations.
  2015 Acura TLX Transmission Fluid Capacity: Blunt and Straightforward Guide

By following these safety precautions, you can ensure a smooth and safe transmission fluid change for your 2010 Acura TSX.

In conclusion, maintaining the correct transmission fluid level is vital for the longevity and performance of your 2010 Acura TSX. By referring to the transmission fluid capacity table and following the step-by-step guide, you can confidently perform a fluid change and keep your transmission in excellent condition. Remember, regular maintenance is key to a reliable and enjoyable driving experience.

What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top