2010 Malibu Transmission Fluid Capacity: A Guide to Proper Maintenance

2010 Malibu Transmission Fluid Capacity

When it comes to maintaining your 2010 Malibu, one crucial aspect that often gets overlooked is the transmission fluid. Properly maintaining the transmission fluid can significantly extend the life of your vehicle’s transmission and prevent costly repairs down the road. In this article, we will discuss the transmission fluid capacity for the 2010 Malibu, so you can ensure you have the right amount for optimal performance.

Transmission Fluid Capacity and Type

Before we dive into the specifics, it’s important to note that the transmission fluid capacity can vary depending on the specific model and engine of your 2010 Malibu. However, as a general guideline, the transmission fluid capacity for most 2010 Malibu models is approximately 7.4 quarts or 7 liters.

Now that we know the capacity, let’s talk about the type of transmission fluid you should use. For the 2010 Malibu, General Motors recommends using DEXRON-VI Automatic Transmission Fluid (ATF). This type of ATF is specifically formulated to meet the requirements of your vehicle’s transmission and provide optimal performance and protection.

How to Check and Add Transmission Fluid

Checking and adding transmission fluid to your 2010 Malibu is a relatively straightforward process. Here are the steps you need to follow:

  1. Park your vehicle on a level surface and engage the parking brake for safety.
  2. Locate the transmission fluid dipstick. It is usually labeled and can be found near the back of the engine compartment.
  3. With the engine warmed up and running, carefully remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level. The dipstick will have markings indicating the minimum and maximum levels. Ensure that the fluid level is within this range.
  5. If the fluid level is low, you will need to add transmission fluid. Use a funnel to pour the fluid into the transmission through the dipstick tube. Be cautious not to overfill, as it can lead to transmission issues.
  6. Recheck the fluid level using the dipstick and add more fluid if necessary. Repeat this process until the fluid level is within the recommended range.
  7. Once you have reached the desired fluid level, securely reinsert the dipstick and ensure it is properly seated.

Remember, it’s essential to use the correct type of transmission fluid and not exceed the recommended capacity. Using the wrong fluid or overfilling can cause damage to your transmission and result in costly repairs.


Now that you know the transmission fluid capacity for your 2010 Malibu, you can confidently maintain your vehicle’s transmission for optimal performance and longevity. Remember to always use the recommended DEXRON-VI ATF and follow the proper procedures for checking and adding fluid. By taking care of your transmission, you’ll be able to enjoy a smoother and more reliable driving experience.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top