2010 Nissan Cube Transmission Fluid Capacity: A Straightforward Guide

2010 Nissan Cube Transmission Fluid Capacity

When it comes to maintaining your 2010 Nissan Cube, one important aspect to consider is the transmission fluid capacity. Ensuring that you have the correct amount of transmission fluid is crucial for the smooth operation of your vehicle. In this article, we will provide you with the necessary information regarding the transmission fluid capacity for your 2010 Nissan Cube, without any unnecessary fluff or sugarcoating.

Transmission Fluid Capacity and Type

Before we dive into the specifics, let’s take a look at the transmission fluid capacity and type for your 2010 Nissan Cube. The table below provides the recommended transmission fluid capacity in both quarts and liters:

Transmission Fluid Capacity Quarts Liters
Automatic Transmission 7.4 7.0
Manual Transmission 6.9 6.5

Now that you have the necessary information, let’s move on to the next steps.

How to Check and Add Transmission Fluid

  1. Make sure your vehicle is parked on a level surface and the engine is turned off.
  2. Locate the transmission fluid dipstick. It is usually labeled and can be found near the back of the engine compartment.
  3. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level. The dipstick will have markings indicating the minimum and maximum levels.
  5. If the fluid level is below the minimum mark, you will need to add transmission fluid. Use a funnel to pour the fluid into the transmission through the dipstick tube. Be careful not to overfill.
  6. Recheck the fluid level using the dipstick and add more fluid if necessary. Repeat this process until the fluid level reaches the appropriate range.
  7. Once you have reached the correct fluid level, securely reinsert the dipstick and close the hood of your vehicle.

Remember, it is crucial to use the recommended type of transmission fluid for your 2010 Nissan Cube. Consult your owner’s manual or contact a certified Nissan technician if you are unsure about the appropriate fluid type.


Now that you have the transmission fluid capacity and type for your 2010 Nissan Cube, you can confidently maintain your vehicle’s transmission system. By following the steps provided, you can ensure that your transmission fluid is at the correct level, promoting smooth and efficient operation. Remember to always prioritize safety and consult a professional if you have any doubts or concerns. Keep your Nissan Cube running smoothly and enjoy the ride!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top