2010 Nissan Maxima Transmission Fluid Capacity and Maintenance Guide

2010 Nissan Maxima Transmission Fluid Capacity

When it comes to maintaining your 2010 Nissan Maxima, one of the essential tasks is checking and changing the transmission fluid. The transmission fluid plays a crucial role in keeping your car’s transmission system running smoothly. In this article, we will discuss the transmission fluid capacity for the 2010 Nissan Maxima and provide you with all the information you need to keep your car in top shape.

Transmission Fluid Capacity and Type

Before we dive into the details, let’s take a look at the transmission fluid capacity for the 2010 Nissan Maxima:

Transmission Type Fluid Capacity (Quarts) Fluid Capacity (Liters)
CVT 7.4 7.0
6-Speed Automatic 10.9 10.3

Now that you know the transmission fluid capacity for your 2010 Nissan Maxima, let’s move on to the next steps.

Checking the Transmission Fluid

  1. Make sure your car is parked on a level surface and the engine is turned off.
  2. Locate the transmission fluid dipstick. It is usually labeled and can be found near the engine bay.
  3. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Insert the dipstick back into the transmission and then remove it again.
  5. Check the fluid level on the dipstick. It should be within the designated range.
  6. If the fluid level is low, you will need to add more transmission fluid. Refer to the next section for instructions on how to do that.

Changing the Transmission Fluid

Changing the transmission fluid is a more involved process and may require some mechanical knowledge. If you are not confident in your abilities, it is recommended to seek professional help. However, if you are up for the challenge, here are the general steps:

  1. Ensure your car is parked on a level surface and the engine is turned off.
  2. Locate the transmission fluid drain plug. It is usually located on the bottom of the transmission pan.
  3. Place a drain pan underneath the drain plug to catch the old fluid.
  4. Remove the drain plug and allow the old fluid to drain completely.
  5. Once the fluid has drained, replace the drain plug and tighten it securely.
  6. Locate the transmission fluid fill plug. It is usually located on the side of the transmission.
  7. Remove the fill plug and add the recommended amount of new transmission fluid. Refer to the table above for the correct capacity.
  8. Replace the fill plug and tighten it securely.

Remember, it is crucial to use the recommended type of transmission fluid for your 2010 Nissan Maxima. Consult your owner’s manual or contact a Nissan dealership for the correct fluid type.

By following these steps and keeping up with regular transmission fluid checks and changes, you can ensure that your 2010 Nissan Maxima’s transmission system stays in optimal condition. Remember, a well-maintained transmission leads to a smoother driving experience and helps prolong the life of your vehicle.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top