2010 Toyota Corolla Transmission Fluid Capacity and Maintenance Guide

2010 Toyota Corolla Transmission Fluid Capacity

When it comes to maintaining your 2010 Toyota Corolla, one important aspect that often gets overlooked is the transmission fluid. Ensuring that your transmission is properly lubricated and functioning optimally is crucial for the longevity and performance of your vehicle. In this article, we will discuss the transmission fluid capacity for the 2010 Toyota Corolla, providing you with the information you need to keep your car running smoothly.

Transmission Fluid Capacity and Type

Before we dive into the specifics, let’s take a look at the transmission fluid capacity for the 2010 Toyota Corolla. The table below provides the capacity in both quarts and liters:

Transmission Fluid Capacity Quarts Liters
Automatic Transmission 3.2 quarts 3.0 liters
Manual Transmission 2.6 quarts 2.5 liters

Now that you know the capacity, let’s talk about the type of transmission fluid you should use. For the 2010 Toyota Corolla, it is recommended to use Toyota Genuine ATF WS (Automatic Transmission Fluid – World Standard) for automatic transmissions. This fluid is specifically designed to meet the requirements of your vehicle and ensure optimal performance.

For manual transmissions, it is recommended to use Toyota Genuine Manual Transmission Gear Oil or an equivalent oil that meets the API GL-4 specification. Using the correct type of fluid is essential to maintain the integrity of your transmission and prevent any potential damage.

How to Check and Add Transmission Fluid

Checking and adding transmission fluid is a relatively simple process, but it is important to follow the correct steps to ensure accuracy. Here is a step-by-step guide:

  1. Start your vehicle and let the engine warm up to normal operating temperature.
  2. Locate the transmission dipstick, which is usually labeled and can be found near the back of the engine compartment.
  3. With the engine running and the transmission in park or neutral, remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and remove it again to check the fluid level. The dipstick will have markings indicating the proper fluid level range.
  5. If the fluid level is below the recommended range, add the appropriate type of transmission fluid through the dipstick tube. Use a funnel to avoid spills.
  6. Recheck the fluid level using the dipstick and add more fluid if necessary. Be careful not to overfill.
  7. Once the fluid level is within the recommended range, securely reinsert the dipstick and close the hood.

Remember, it is crucial to use the correct type of transmission fluid and not exceed the recommended capacity. Overfilling or using the wrong fluid can lead to transmission damage and costly repairs.


Now that you have the transmission fluid capacity for your 2010 Toyota Corolla, you can confidently maintain your vehicle’s transmission and ensure its longevity. Remember to use the recommended type of fluid and follow the proper steps when checking and adding transmission fluid. By taking care of your transmission, you can enjoy a smooth and reliable driving experience for years to come.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top