2012 Acura TL Transmission Fluid Capacity: Essential Maintenance Guide

2012 Acura TL Transmission Fluid Capacity

When it comes to maintaining your 2012 Acura TL, one crucial aspect that often gets overlooked is the transmission fluid. Ensuring that your transmission is properly lubricated is essential for the smooth operation and longevity of your vehicle. In this article, we will dive into the transmission fluid capacity for the 2012 Acura TL, providing you with the information you need to keep your car running at its best.

Popular posts
What to do to prolong the life of your manual gearbox
Automatic transmission: what it is, how it works

Transmission Fluid Capacity and Type

Before we get into the nitty-gritty details, let’s start with the basics. The 2012 Acura TL requires a specific amount of transmission fluid to function optimally. The transmission fluid capacity for this model is as follows:

Transmission Fluid Type Capacity (Quarts) Capacity (Liters)
Automatic Transmission Fluid (ATF) 3.5 3.3

It is important to note that using the correct type and amount of transmission fluid is crucial for the health of your vehicle’s transmission. Using the wrong fluid or not enough of it can lead to serious damage and costly repairs.

  2006 Acura TL Transmission Fluid Capacity: What You Need to Know

How to Check and Add Transmission Fluid

Now that you know the transmission fluid capacity for your 2012 Acura TL, let’s discuss how to check and add transmission fluid if needed. Here are the steps to follow:

  1. Park your vehicle on a level surface and engage the parking brake.
  2. Locate the transmission dipstick, which is usually labeled and located near the engine.
  3. With the engine warmed up and running, carefully remove the dipstick and wipe it clean with a cloth or paper towel.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level. The dipstick will have markings indicating the proper fluid level range.
  5. If the fluid level is below the recommended range, you will need to add transmission fluid. Use a funnel to pour the fluid into the transmission through the dipstick tube. Be sure to add the fluid gradually and check the level frequently to avoid overfilling.
  6. Once you have reached the proper fluid level, securely reinsert the dipstick and ensure it is properly seated.
  2005 Acura MDX Transmission Fluid Capacity: All You Need to Know

Remember, it is crucial to use the correct type of transmission fluid recommended by Acura for your 2012 TL. Consult your owner’s manual or contact a certified Acura technician if you are unsure about the specific type of fluid to use.


Keeping your 2012 Acura TL’s transmission properly maintained is essential for its overall performance and longevity. By knowing the transmission fluid capacity and following the proper procedures for checking and adding fluid, you can ensure that your vehicle’s transmission stays in top shape. Remember, using the correct type and amount of fluid is crucial, so don’t cut corners when it comes to your transmission’s health. Take care of your Acura TL, and it will take care of you on the road.


What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top