2012 Chevy Cruze 1.8 Transmission Fluid Capacity: A Straightforward Guide

2012 Chevy Cruze 1.8 Transmission Fluid Capacity

If you’re a proud owner of a 2012 Chevy Cruze 1.8, you might be wondering about the transmission fluid capacity. Well, you’ve come to the right place! In this article, we’ll provide you with all the information you need, without any unnecessary fluff. So, let’s get straight to the point.

Popular posts
What to do to prolong the life of your manual gearbox
Automatic transmission: what it is, how it works

Transmission Fluid Capacity and Type

To keep your Chevy Cruze running smoothly, it’s important to know the correct transmission fluid capacity and type. Here’s a handy table that outlines the capacity in both quarts and liters:

Transmission Fluid Capacity Quarts Liters
Manual Transmission 2.4 quarts 2.3 liters
Automatic Transmission 4.2 quarts 4 liters

Now that you have the numbers, it’s important to use the right type of transmission fluid. For the 2012 Chevy Cruze 1.8, General Motors recommends using Dexron VI automatic transmission fluid for automatic transmissions. For manual transmissions, GM recommends using GM Manual Transmission Fluid 88861800.

  1990 Chevy 1500 Transmission Fluid Capacity: Blunt and Straightforward Guide

How to Check and Add Transmission Fluid

Checking and adding transmission fluid is a relatively simple process, but it’s crucial to follow the correct steps. Here’s a step-by-step guide to help you out:

  1. Park your Chevy Cruze on a level surface and engage the parking brake.
  2. Start the engine and let it idle for a few minutes to warm up the transmission.
  3. Locate the transmission dipstick, which is usually labeled and located near the back of the engine bay.
  4. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  5. Reinsert the dipstick fully and then remove it again to check the fluid level.
  6. The dipstick will have markings indicating the minimum and maximum fluid levels. Ensure that the fluid level is within this range.
  7. If the fluid level is low, use a funnel to add the appropriate transmission fluid through the dipstick tube. Be careful not to overfill.
  8. Recheck the fluid level and add more if necessary.
  9. Once you’re satisfied with the fluid level, securely reinsert the dipstick.
  10. Turn off the engine and give it a few minutes to settle.
  2006 Monte Carlo Transmission Fluid Capacity: A Guide to Maintaining Your Car

Remember, it’s crucial to follow the manufacturer’s recommendations and use the correct type and amount of transmission fluid. Failure to do so can result in damage to your vehicle’s transmission, leading to costly repairs.

Final Thoughts

Now that you know the transmission fluid capacity and type for your 2012 Chevy Cruze 1.8, you can confidently maintain your vehicle’s transmission. Just remember to always prioritize safety, follow the correct procedures, and use the recommended fluids. Regular maintenance will help ensure that your Chevy Cruze continues to perform at its best for years to come.

Author

What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top