2012 Ford Edge Transmission Fluid Capacity: A Guide to Maintenance

2012 Ford Edge Transmission Fluid Capacity

When it comes to maintaining your 2012 Ford Edge, one of the essential tasks is checking and changing the transmission fluid. The transmission fluid plays a crucial role in keeping your vehicle’s transmission system running smoothly and efficiently. In this article, we will discuss the transmission fluid capacity for the 2012 Ford Edge, providing you with the information you need to keep your vehicle in top shape.

Transmission Fluid Capacity and Type

Before we dive into the details, let’s take a look at the transmission fluid capacity and type for the 2012 Ford Edge. It’s important to use the correct amount and type of fluid to ensure optimal performance and longevity of your vehicle’s transmission system. Here is a table outlining the transmission fluid capacity in both quarts and liters:

Transmission Fluid Capacity Quarts Liters
6-Speed Automatic Transmission (6F35) 12.0 11.4

The 2012 Ford Edge is equipped with a 6-speed automatic transmission (6F35), which requires approximately 12.0 quarts or 11.4 liters of transmission fluid for a complete fluid change. It’s crucial to use the specified amount to ensure proper lubrication and cooling of the transmission components.

  2012 Ford Focus Automatic Transmission Fluid Capacity and Change Guide

Changing the Transmission Fluid

Now that you know the transmission fluid capacity for your 2012 Ford Edge, let’s briefly discuss the process of changing the transmission fluid. Please note that this is a general overview, and it’s always recommended to consult your vehicle’s owner’s manual for detailed instructions specific to your model.

  1. Ensure your vehicle is parked on a level surface and the engine is turned off.
  2. Locate the transmission fluid dipstick, usually labeled and located near the engine bay.
  3. Using a clean rag or paper towel, remove the dipstick and wipe it clean.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level. The fluid should be within the designated range on the dipstick.
  5. If the fluid is low or appears dirty, it’s time to change it. Consult your owner’s manual for the recommended type of transmission fluid for your vehicle.
  6. Using a suitable fluid pump, drain the old transmission fluid from the transmission pan. Be cautious as the fluid may be hot.
  7. Once the old fluid is drained, replace the transmission pan gasket and reinstall the pan securely.
  8. Refill the transmission with the appropriate amount of new transmission fluid, using a funnel to avoid spills.
  9. Start the engine and let it idle for a few minutes to allow the fluid to circulate.
  10. Check the fluid level again using the dipstick and add more fluid if necessary.
  11. Dispose of the old transmission fluid responsibly, following local regulations.
  2004 F250 6.0 Transmission Fluid Capacity: Know Your Numbers

Remember, safety is of utmost importance when working with any vehicle maintenance tasks. Always take necessary precautions, such as wearing protective gloves and eyewear, and ensure the vehicle is securely supported before getting underneath it.

By following these steps and using the correct transmission fluid capacity and type, you can help maintain the performance and longevity of your 2012 Ford Edge’s transmission system. Regularly checking and changing the transmission fluid is a simple yet vital task that can save you from costly repairs down the road.

Keep your Ford Edge running smoothly, and enjoy the open road with confidence!

Author

What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top