2012 Ford Focus Automatic Transmission Fluid Capacity and Change Guide

2012 Ford Focus Automatic Transmission Fluid Capacity

When it comes to maintaining your 2012 Ford Focus, one crucial aspect that often gets overlooked is the automatic transmission fluid. Ensuring that your transmission is properly lubricated and functioning optimally is essential for the longevity and performance of your vehicle. In this article, we will provide you with the necessary information regarding the transmission fluid capacity for the 2012 Ford Focus, so you can keep your car running smoothly.

Transmission Fluid Capacity and Type

Before we dive into the specifics, let’s take a look at the transmission fluid capacity and type for the 2012 Ford Focus. It’s important to use the correct fluid and not exceed the recommended capacity to avoid potential damage to your transmission. Here’s a table outlining the transmission fluid capacity in both quarts and liters:

Transmission Fluid Capacity Quarts Liters
Automatic Transmission 6.9 quarts 6.5 liters

Now that you know the recommended transmission fluid capacity for your 2012 Ford Focus, let’s move on to the next steps in ensuring a smooth and hassle-free transmission fluid change.

Transmission Fluid Change

Changing the transmission fluid in your 2012 Ford Focus is a relatively straightforward process, but it’s important to follow the correct steps to ensure a proper and efficient fluid change. Here’s a step-by-step guide to help you through the process:

  1. Start by parking your vehicle on a level surface and engaging the parking brake for safety.
  2. Locate the transmission fluid drain plug, which is typically located on the bottom of the transmission pan.
  3. Place a drain pan underneath the drain plug to catch the old fluid as it drains out.
  4. Using a wrench or socket, carefully loosen and remove the drain plug, allowing the old fluid to drain completely.
  5. Once the old fluid has drained, replace the drain plug and tighten it securely.
  6. Locate the transmission fluid dipstick, which is usually labeled and located near the engine bay.
  7. Remove the dipstick and insert a funnel into the dipstick tube.
  8. Pour the recommended amount of transmission fluid, according to the capacity mentioned earlier, into the funnel.
  9. Allow the fluid to settle for a few moments, then check the fluid level using the dipstick. Add more fluid if necessary.
  10. Replace the dipstick and ensure it is securely in place.
  11. Start your vehicle and let it idle for a few minutes to allow the new fluid to circulate throughout the transmission.
  12. Check the fluid level once again and adjust if needed.

Following these steps will help you successfully change the transmission fluid in your 2012 Ford Focus and maintain its optimal performance.


Now that you have the necessary information regarding the transmission fluid capacity for the 2012 Ford Focus, you can confidently take care of this important maintenance task. Remember to always use the recommended fluid and follow the proper procedures to ensure a smooth and trouble-free transmission. By taking care of your vehicle’s transmission, you’ll be able to enjoy a reliable and efficient driving experience for years to come.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top