2012 Ford Fusion 2.5 Transmission Fluid Capacity: Blunt and Straightforward Guide

2012 Ford Fusion 2.5 Transmission Fluid Capacity

If you’re a proud owner of a 2012 Ford Fusion 2.5, you might be wondering about the transmission fluid capacity. Well, you’ve come to the right place! In this article, we’ll give you all the blunt and straightforward information you need, without any sugarcoating. So, let’s dive right in!

Popular posts
What to do to prolong the life of your manual gearbox
Automatic transmission: what it is, how it works

Transmission Fluid Capacity and Type

To keep your Fusion’s transmission running smoothly, it’s crucial to know the right amount of transmission fluid it requires. The 2012 Ford Fusion 2.5 has a transmission fluid capacity of approximately 9.5 quarts or 9 liters. Yes, you heard it right, that’s a lot of fluid!

Now, let’s talk about the type of transmission fluid your Fusion needs. Ford recommends using the Motorcraft MERCON LV Automatic Transmission Fluid. It’s specifically designed for Ford vehicles and meets all the necessary requirements for optimal performance.

How to Check and Add Transmission Fluid

Checking and adding transmission fluid is an essential maintenance task for your Fusion. Here’s a step-by-step guide to help you get the job done:

  1. Park your Fusion on a level surface and engage the parking brake for safety.
  2. Locate the transmission fluid dipstick, which is usually labeled and located near the engine.
  3. With the engine warmed up and running, pull out the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then pull it out again to check the fluid level.
  5. If the fluid level is below the “Add” mark or appears dark and dirty, it’s time to add some fresh fluid.
  6. Using a funnel, slowly pour the recommended transmission fluid into the dipstick tube. Be careful not to overfill.
  7. Repeat steps 3 to 5 to ensure the fluid level is within the acceptable range.
  8. Once you’re satisfied with the fluid level, securely reinsert the dipstick.
  2007 F250 Transmission Fluid Capacity: Ensuring Optimal Performance

Remember, safety should always be a priority when working with your vehicle. If you’re unsure or uncomfortable performing this task, it’s best to consult a professional mechanic.

Conclusion

Knowing the transmission fluid capacity and type for your 2012 Ford Fusion 2.5 is essential for maintaining the health of your vehicle’s transmission. With a capacity of approximately 9.5 quarts or 9 liters and the recommended Motorcraft MERCON LV Automatic Transmission Fluid, you can ensure optimal performance and longevity.

By following the steps outlined above, you can confidently check and add transmission fluid to keep your Fusion running smoothly. Just remember to prioritize safety and consult a professional if needed. Now, go out there and take care of your Fusion like a boss!

  2015 Ford Escape 1.6 Transmission Fluid Capacity: A Blunt Guide

Author

What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top