2007 Ford Explorer Transmission Fluid Capacity: A Comprehensive Guide

2007 Ford Explorer Transmission Fluid Capacity

In order to properly maintain your 2007 Ford Explorer, it is important to know the correct transmission fluid capacity. This information will help you ensure that your vehicle is running smoothly and efficiently. So, let’s get straight to the point and provide you with the necessary details.

Transmission Fluid Capacity and Type

When it comes to the transmission fluid capacity of your 2007 Ford Explorer, you should be aware that it can vary depending on the specific model and engine type. However, as a general guideline, most 2007 Ford Explorer models have a transmission fluid capacity of approximately 13.9 quarts or 13.1 liters.

It is important to note that this capacity is for a complete transmission fluid change, including the torque converter and transmission cooler. If you are only performing a partial fluid change, you may require less fluid.

Now, let’s talk about the type of transmission fluid that is recommended for your 2007 Ford Explorer. Ford recommends using Mercon V automatic transmission fluid for most models. However, it is always a good idea to consult your vehicle’s owner’s manual or contact a Ford dealership to ensure you are using the correct fluid for your specific model.

  2012 Ford Flex Transmission Fluid Capacity and Maintenance Guide

How to Check and Add Transmission Fluid

If you are experiencing transmission issues or simply want to check the fluid level in your 2007 Ford Explorer, here are the steps to follow:

  1. Ensure that your vehicle is parked on a level surface and the engine is running.
  2. Locate the transmission dipstick, which is usually labeled and located near the back of the engine bay.
  3. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level.
  5. The dipstick will have markings indicating the proper fluid level. If the fluid is below the “Add” or “Cold” mark, you will need to add more fluid.
  6. To add fluid, use a funnel to pour it into the transmission dipstick tube. Be sure to add small amounts at a time and recheck the fluid level frequently to avoid overfilling.
  7. Once the fluid level is within the recommended range, securely reinsert the dipstick.
  2004 Mustang Transmission Fluid Capacity: Blunt and Straightforward Guide

Remember, it is crucial to use the correct type of transmission fluid and to not overfill the transmission. Overfilling can lead to damage and costly repairs, so be cautious and follow the recommended guidelines.


Knowing the correct transmission fluid capacity for your 2007 Ford Explorer is essential for maintaining the health and performance of your vehicle. By following the guidelines provided and using the recommended fluid, you can ensure that your transmission operates smoothly and efficiently. Remember to always consult your owner’s manual or a Ford dealership for specific information regarding your vehicle model.

Model Transmission Fluid Capacity (Quarts) Transmission Fluid Capacity (Liters)
2007 Ford Explorer (most models) 13.9 13.1


What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top