2012 Hyundai Tucson Transmission Fluid Capacity and Maintenance Guide

2012 Hyundai Tucson Transmission Fluid Capacity

When it comes to maintaining your 2012 Hyundai Tucson, one important aspect to consider is the transmission fluid. Properly maintaining the transmission fluid can help ensure smooth shifting and extend the life of your vehicle’s transmission. In this article, we will discuss the transmission fluid capacity for the 2012 Hyundai Tucson, as well as the type of fluid you should use.

Transmission Fluid Capacity

Knowing the correct transmission fluid capacity for your vehicle is essential to prevent overfilling or underfilling. The 2012 Hyundai Tucson has a transmission fluid capacity of approximately 7.4 quarts or 7 liters.

Fluid Type Capacity (Quarts) Capacity (Liters)
Automatic Transmission Fluid (ATF) 7.4 7

Choosing the Right Fluid

Using the correct type of transmission fluid is crucial for optimal performance and longevity of your vehicle’s transmission. For the 2012 Hyundai Tucson, it is recommended to use Hyundai Genuine ATF SP-IV or equivalent. It is important to avoid using any other type of fluid that is not specifically recommended by the manufacturer, as it may cause damage to the transmission.

  2007 Hyundai Accent Transmission Fluid Capacity and Maintenance Guide

Fluid Change Interval

Regularly changing the transmission fluid is essential to maintain the health of your vehicle’s transmission. Hyundai recommends changing the transmission fluid in the 2012 Tucson every 60,000 miles or 48 months, whichever comes first. However, it is always a good idea to consult your vehicle’s owner’s manual for the manufacturer’s specific recommendations.

How to Check the Fluid Level

Checking the transmission fluid level is an important part of maintaining your vehicle. Here’s a step-by-step guide on how to check the transmission fluid level in your 2012 Hyundai Tucson:

  1. Make sure your vehicle is parked on a level surface and the engine is warmed up.
  2. Locate the transmission dipstick, which is usually labeled and located near the back of the engine bay.
  3. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level.
  5. The fluid level should be between the “MIN” and “MAX” marks on the dipstick. If it is below the “MIN” mark, you may need to add fluid.
  6. If you need to add fluid, use a funnel to pour the fluid into the transmission through the dipstick tube. Be sure to add the fluid gradually and check the level frequently to avoid overfilling.
  7. Once the fluid level is correct, securely reinsert the dipstick.
  2015 Hyundai Sonata Transmission Fluid Capacity and Maintenance Guide

Remember, always refer to your vehicle’s owner’s manual for the most accurate and up-to-date information regarding transmission fluid capacity, type, and maintenance procedures. Following the manufacturer’s recommendations will help keep your 2012 Hyundai Tucson running smoothly for years to come.

What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top