2012 Impala Transmission Fluid Capacity: A Guide to Keeping Your Ride Smooth

2012 Impala Transmission Fluid Capacity

If you’re a proud owner of a 2012 Impala and find yourself in need of a transmission fluid change, you’ve come to the right place. In this article, we’ll dive into the nitty-gritty details of the transmission fluid capacity for your beloved vehicle. So buckle up and let’s get started!

Transmission Fluid Capacity and Type

When it comes to the 2012 Impala, you’ll need to know the right amount of transmission fluid to keep things running smoothly. Here’s a handy table that outlines the capacity in both quarts and liters:

Transmission Fluid Capacity Quarts Liters
4-Speed Automatic Transmission (MN4) 11.5 quarts 10.9 liters
6-Speed Automatic Transmission (MH6) 11.4 quarts 10.8 liters

Now that you have the numbers, it’s time to roll up your sleeves and get down to business. Here’s a step-by-step guide to help you through the process:

Transmission Fluid Change: Step-by-Step

  1. Make sure your vehicle is parked on a level surface and the engine is turned off.
  2. Locate the transmission fluid dipstick. It’s usually labeled and can be found near the back of the engine compartment.
  3. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then remove it again. This time, check the fluid level indicated on the dipstick. It should be within the “Full” and “Add” marks.
  5. If the fluid level is low, it’s time to add some fresh transmission fluid. Refer to the table above to determine the appropriate amount for your specific transmission.
  6. Using a funnel, carefully pour the transmission fluid into the dipstick tube. Take your time and avoid spills.
  7. After adding the fluid, wait for a few minutes to allow it to settle. Then, recheck the fluid level using the dipstick.
  8. If the level is still low, repeat steps 6 and 7 until the fluid reaches the proper range.
  9. Once you’re satisfied with the fluid level, securely reinsert the dipstick and close the hood.

Remember, safety should always be a priority. If you’re not comfortable performing a transmission fluid change yourself, it’s best to seek professional help. Working with transmission fluid can be messy and potentially hazardous, so don’t take any unnecessary risks.

Now that you’re armed with the knowledge of the 2012 Impala’s transmission fluid capacity, you can confidently tackle this maintenance task. Keep your vehicle running smoothly and enjoy the ride without any transmission troubles. Happy driving!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top