2013 Ford Explorer Transmission Fluid Capacity and Type

2013 Ford Explorer Transmission Fluid Capacity

When it comes to maintaining your 2013 Ford Explorer, one important aspect to consider is the transmission fluid. The transmission fluid plays a vital role in keeping your vehicle’s transmission system running smoothly and efficiently. In this article, we will discuss the transmission fluid capacity for the 2013 Ford Explorer, as well as the type of fluid required.

Transmission Fluid Capacity

Knowing the correct transmission fluid capacity is essential to ensure that your vehicle’s transmission system is properly lubricated. The 2013 Ford Explorer has a transmission fluid capacity of approximately 12 quarts or 11.4 liters.

Type of Fluid

Now that you know the transmission fluid capacity, it’s crucial to use the right type of fluid for your 2013 Ford Explorer. Ford recommends using Mercon LV Automatic Transmission Fluid for the 2013 Explorer. It is important to note that using the wrong type of fluid can lead to transmission problems and potentially costly repairs.

How to Check and Add Transmission Fluid

  1. Park your vehicle on a level surface and engage the parking brake.
  2. Start the engine and let it idle for a few minutes to warm up the transmission fluid.
  3. Locate the transmission dipstick, which is usually labeled and located near the back of the engine bay.
  4. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  5. Reinsert the dipstick fully and then remove it again to check the fluid level.
  6. The dipstick will have markings indicating the minimum and maximum fluid levels. Ensure that the fluid level falls within this range.
  7. If the fluid level is low, carefully add the recommended Mercon LV Automatic Transmission Fluid through the dipstick tube. Use a funnel to avoid spills.
  8. Recheck the fluid level using the dipstick and add more fluid if necessary.
  9. Once the fluid level is correct, securely reinsert the dipstick.

Remember to always follow the manufacturer’s guidelines and refer to your vehicle’s owner’s manual for specific instructions and safety precautions when checking or adding transmission fluid.


Properly maintaining the transmission fluid in your 2013 Ford Explorer is essential for the longevity and performance of your vehicle’s transmission system. By knowing the correct transmission fluid capacity and using the recommended type of fluid, you can ensure that your Explorer’s transmission operates smoothly and efficiently. Regularly checking and adding transmission fluid when necessary will help prevent potential issues and keep your vehicle running at its best.

Transmission Fluid Capacity Type of Fluid
Approximately 12 quarts or 11.4 liters Mercon LV Automatic Transmission Fluid

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top