2014 Toyota Tacoma Transmission Fluid Capacity
| Popular posts |
|---|
| What to do to prolong the life of your manual gearbox |
| Automatic transmission: what it is, how it works |
Introduction
If you own a 2014 Toyota Tacoma and are wondering about the transmission fluid capacity, you’ve come to the right place. In this article, we’ll provide you with the blunt and straightforward information you need, without any sugarcoating. So let’s dive right in!
Transmission Fluid Capacity and Type
To properly maintain your Toyota Tacoma’s transmission, it’s crucial to know the correct fluid capacity and type. Here’s a table that outlines the transmission fluid capacity in both quarts and liters:
| Transmission Fluid Capacity | Quarts | Liters |
|---|---|---|
| Automatic Transmission | 12.9 | 12.2 |
| Manual Transmission | 3.7 | 3.5 |
Steps to Check and Add Transmission Fluid
If you’re unsure about the current fluid level in your Tacoma’s transmission or need to add more, follow these steps:
- Park your vehicle on a level surface and engage the parking brake.
- Locate the transmission dipstick. In the case of an automatic transmission, it is usually located near the back of the engine compartment. For a manual transmission, it can be found on the side of the transmission.
- With the engine warmed up and running, remove the dipstick and wipe it clean with a lint-free cloth.
- Reinsert the dipstick fully and then remove it again to check the fluid level. The dipstick will have markings indicating the appropriate fluid level range.
- If the fluid level is below the recommended range, you’ll need to add transmission fluid. Use a funnel to pour the fluid into the dipstick tube, being careful not to overfill.
- Recheck the fluid level using the dipstick and add more fluid if necessary. Repeat this process until the fluid level is within the recommended range.
- Once you’re satisfied with the fluid level, securely reinsert the dipstick and close the hood.
Safety Precautions
While checking and adding transmission fluid is a relatively simple task, it’s important to prioritize safety. Here are a few safety precautions to keep in mind:
- Always work on your vehicle in a well-ventilated area to avoid inhaling harmful fumes.
- Ensure the engine is turned off and cool before checking or adding transmission fluid.
- Use caution when working around hot engine components to prevent burns.
- Follow the manufacturer’s recommendations regarding the type and brand of transmission fluid to use.
Conclusion
Now that you know the 2014 Toyota Tacoma’s transmission fluid capacity and the steps to check and add fluid, you can confidently maintain your vehicle’s transmission. Remember to prioritize safety and follow the manufacturer’s recommendations. By taking care of your Tacoma’s transmission, you’ll ensure smooth and reliable performance for years to come.
Author
What Color Should Transmission Fluid Be?
