2015 Acura MDX Transmission Fluid Capacity: Essential Maintenance Guide

2015 Acura MDX Transmission Fluid Capacity

When it comes to maintaining your 2015 Acura MDX, one of the essential tasks is ensuring that the transmission fluid is at the proper level. The transmission fluid plays a crucial role in keeping your vehicle’s transmission running smoothly and efficiently. In this article, we will discuss the transmission fluid capacity for the 2015 Acura MDX, so you can keep your vehicle in top shape.

Transmission Fluid Capacity and Type

Knowing the correct transmission fluid capacity for your 2015 Acura MDX is vital to ensure optimal performance. Below is a table that provides the transmission fluid capacity in both quarts and liters:

Transmission Fluid Capacity Quarts Liters
3.5L V6 Engine 3.5 quarts 3.3 liters

It is important to note that the transmission fluid capacity may vary depending on the specific model and engine of your 2015 Acura MDX. Therefore, it is always recommended to consult your vehicle’s owner’s manual or contact a certified Acura technician for the most accurate information.

How to Check and Add Transmission Fluid

If you notice that your transmission fluid is low or if you are experiencing transmission issues, it may be necessary to check and add transmission fluid. Here are the steps to do so:

  1. Ensure that your vehicle is parked on a level surface and the engine is turned off.
  2. Locate the transmission dipstick, which is typically labeled and located near the engine.
  3. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully into the transmission and then remove it again.
  5. Check the fluid level indicated on the dipstick. The level should be between the “MIN” and “MAX” marks.
  6. If the fluid level is below the “MIN” mark, you will need to add transmission fluid.
  7. Using a funnel, carefully pour the appropriate type of transmission fluid into the dipstick tube. Add small amounts at a time and recheck the fluid level until it reaches the desired range.
  8. Be cautious not to overfill the transmission, as it can lead to damage.
  9. Once the fluid level is correct, securely reinsert the dipstick and ensure it is properly seated.

Remember, it is crucial to use the recommended type of transmission fluid specified in your vehicle’s owner’s manual. Using the wrong type of fluid can cause damage to the transmission and may void any existing warranties.


Keeping your 2015 Acura MDX’s transmission fluid at the proper level is essential for maintaining its performance and longevity. By following the recommended transmission fluid capacity and type, as well as regularly checking and adding fluid when necessary, you can ensure that your vehicle’s transmission operates smoothly. If you have any doubts or concerns, it is always best to consult a certified Acura technician for expert advice and assistance.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top