2015 Honda Accord CVT Transmission Fluid Capacity: A Guide to Maintenance

2015 Honda Accord CVT Transmission Fluid Capacity

When it comes to maintaining your 2015 Honda Accord, one crucial aspect that often gets overlooked is the transmission fluid. The transmission fluid is responsible for lubricating the various components of the CVT (Continuously Variable Transmission) system, ensuring smooth shifting and optimal performance. In this article, we will discuss the transmission fluid capacity for the 2015 Honda Accord CVT and provide you with the necessary information to keep your vehicle running smoothly.

Transmission Fluid Capacity and Type

Before we dive into the transmission fluid capacity, it is essential to know the type of fluid recommended for your 2015 Honda Accord CVT. Honda recommends using their Genuine Honda CVT Fluid, which is specifically formulated for their CVT systems. Using any other type of fluid may result in poor performance or even damage to the transmission.

The transmission fluid capacity for the 2015 Honda Accord CVT varies depending on the model and engine type. Here is a breakdown of the fluid capacity in both quarts and liters:

  2007 Honda Pilot Transmission Fluid Capacity: A Guide to Maintenance
Model Engine Type Fluid Capacity (Quarts) Fluid Capacity (Liters)
Accord LX, Sport, EX, EX-L 2.4L 4-cylinder 3.1 quarts 2.9 liters
Accord Touring 3.5L V6 4.2 quarts 4.0 liters

How to Check and Add Transmission Fluid

Checking and adding transmission fluid to your 2015 Honda Accord CVT is a relatively simple process. Here are the steps to follow:

  1. Park your vehicle on a level surface and engage the parking brake.
  2. Start the engine and let it idle for a few minutes to warm up the transmission fluid.
  3. Locate the transmission dipstick, which is usually labeled and has a yellow handle.
  4. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  5. Reinsert the dipstick fully and remove it again to check the fluid level.
  6. The fluid level should be between the “MIN” and “MAX” marks on the dipstick. If it is below the “MIN” mark, you will need to add fluid.
  7. To add fluid, remove the fill plug located on the side of the transmission and use a funnel to pour the fluid into the fill hole. Be sure to use the recommended Genuine Honda CVT Fluid.
  8. Check the fluid level again using the dipstick and add more fluid if necessary.
  9. Once the fluid level is within the recommended range, securely reinsert the dipstick and close the fill plug.
  2008 Honda Civic Si Transmission Fluid Capacity and Maintenance Guide

Remember to always refer to your vehicle’s owner’s manual for specific instructions and safety precautions when checking or adding transmission fluid.


Keeping your 2015 Honda Accord CVT’s transmission fluid at the proper level is crucial for maintaining its performance and longevity. By following the recommended fluid capacity and type, as well as the steps to check and add fluid, you can ensure that your vehicle’s CVT system operates smoothly. Remember, using the Genuine Honda CVT Fluid and following the correct procedures will help you avoid potential transmission issues and keep your Honda Accord running like a well-oiled machine.


What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top