2015 Mitsubishi Mirage Manual Transmission Fluid Capacity and Maintenance Guide

2015 Mitsubishi Mirage Manual Transmission Fluid Capacity

When it comes to maintaining your 2015 Mitsubishi Mirage, one crucial aspect that often gets overlooked is the transmission fluid. Properly maintaining the transmission fluid is essential for the smooth operation and longevity of your vehicle’s manual transmission. In this article, we will discuss the transmission fluid capacity for the 2015 Mitsubishi Mirage and provide you with the information you need to keep your transmission running smoothly.

Transmission Fluid Capacity and Type

Before we dive into the details, let’s take a look at the transmission fluid capacity for the 2015 Mitsubishi Mirage. The manual transmission in this vehicle requires approximately 1.9 quarts or 1.8 liters of transmission fluid. It’s important to note that this capacity may vary slightly depending on the specific model and trim level of your Mirage, so always consult your owner’s manual for the most accurate information.

Now that we know the capacity, let’s talk about the type of transmission fluid you should use. Mitsubishi recommends using their own brand of transmission fluid, specifically the Mitsubishi DiaQueen SSTF-I. This fluid is specially formulated to meet the requirements of your Mirage’s manual transmission and provide optimal performance and protection.

How to Check and Add Transmission Fluid

Checking and adding transmission fluid to your 2015 Mitsubishi Mirage is a relatively simple process. Here’s a step-by-step guide to help you get the job done:

  1. Make sure your vehicle is parked on a level surface and the engine is turned off.
  2. Locate the transmission fluid dipstick, which is usually labeled and located near the back of the engine bay.
  3. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level. The dipstick will have markings indicating the proper fluid level range.
  5. If the fluid level is below the recommended range, you will need to add transmission fluid. Use a funnel to pour the fluid into the transmission fluid filler tube, which is typically located near the dipstick.
  6. Check the fluid level again using the dipstick and add more fluid if necessary. Be careful not to overfill.
  7. Once you have reached the proper fluid level, securely reinsert the dipstick and make sure it is fully seated.

Remember, it’s important to use the correct type of transmission fluid and not to overfill. Adding too much fluid can cause damage to the transmission and lead to costly repairs.


Now that you know the transmission fluid capacity for the 2015 Mitsubishi Mirage and how to check and add transmission fluid, you can ensure that your vehicle’s manual transmission stays in optimal condition. Regularly checking and maintaining the transmission fluid will help prolong the life of your transmission and prevent costly repairs down the road. So, don’t neglect this important aspect of your Mirage’s maintenance and keep your transmission running smoothly for years to come.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top