2016 Chevy Silverado Transmission Fluid Capacity: A Blunt Guide

2016 Chevy Silverado Transmission Fluid Capacity

If you’re a proud owner of a 2016 Chevy Silverado, it’s essential to know the transmission fluid capacity to keep your truck running smoothly. In this article, we’ll provide you with all the blunt and straightforward information you need, without any sugarcoating.

Popular posts
What to do to prolong the life of your manual gearbox
Automatic transmission: what it is, how it works

Transmission Fluid Capacity and Type

To ensure your Silverado’s transmission performs at its best, you must use the correct amount and type of transmission fluid. Here’s a table outlining the transmission fluid capacity in both quarts and liters for the 2016 Chevy Silverado:

Transmission Fluid Capacity Quarts Liters
6-Speed Automatic Transmission (MYC, MYD) 12.4 11.7
8-Speed Automatic Transmission (M5U) 11.4 10.8
8-Speed Automatic Transmission (M5U) with Auxiliary Cooler 12.2 11.5

Now that you know the transmission fluid capacity for your specific Silverado model, let’s move on to the next steps.

Transmission Fluid Change

If you’re planning to change the transmission fluid in your 2016 Chevy Silverado, here’s a straightforward guide to help you get the job done:

  1. Ensure your truck is parked on a level surface and the engine is cool.
  2. Locate the transmission fluid dipstick, usually located near the back of the engine bay.
  3. Using a funnel, remove the dipstick and set it aside.
  4. Place a drain pan underneath the transmission pan to catch the old fluid.
  5. Remove the transmission pan bolts, starting from the corners and working your way around.
  6. Once all the bolts are removed, carefully lower the pan and drain the old fluid into the drain pan.
  7. Clean the transmission pan and magnet thoroughly, removing any debris or sludge.
  8. Replace the transmission filter if necessary, following the manufacturer’s instructions.
  9. Reinstall the transmission pan, ensuring all bolts are tightened securely.
  10. Refill the transmission with the appropriate amount of new transmission fluid, using the table above as a guide.
  11. Replace the dipstick and start the engine.
  12. Allow the engine to idle for a few minutes, then shift through all the gears.
  13. Check the transmission fluid level using the dipstick and add more if necessary.
  14. Dispose of the old transmission fluid properly, following local regulations.
  2011 Chevy Traverse Transmission Fluid Capacity: A Guide

Remember, safety is crucial when working on your vehicle. Always wear protective gloves and eyewear, and be cautious of hot surfaces and moving parts. If you’re unsure about performing a transmission fluid change yourself, it’s best to consult a professional.

Now that you have all the information you need, go ahead and give your 2016 Chevy Silverado the care it deserves by maintaining the correct transmission fluid level. Your truck will thank you with smooth and reliable performance on the road.

Author

What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top