2016 Ford F150 Transmission Fluid Capacity: A Must-Know Guide

2016 Ford F150 Transmission Fluid Capacity

When it comes to maintaining your 2016 Ford F150, one crucial aspect that often gets overlooked is the transmission fluid. Regularly checking and changing the transmission fluid is essential to keep your truck running smoothly and avoid costly repairs down the line. In this article, we will discuss the transmission fluid capacity for the 2016 Ford F150, so you know exactly what you need to keep your truck in top shape.

Transmission Fluid Capacity and Type

Before we dive into the details, let’s get straight to the point. The transmission fluid capacity for the 2016 Ford F150 varies depending on the engine and transmission type. Here’s a breakdown:

Engine Transmission Type Fluid Capacity (Quarts) Fluid Capacity (Liters)
3.5L V6 6-speed automatic 13.1 12.4
2.7L V6 6-speed automatic 13.1 12.4
5.0L V8 6-speed automatic 13.1 12.4
3.5L V6 10-speed automatic 12.1 11.4
3.0L V6 Diesel 10-speed automatic 12.1 11.4

Now that you know the transmission fluid capacity for your specific engine and transmission type, it’s time to get down to business.

Changing the Transmission Fluid

  1. Make sure your truck is parked on a level surface and the engine is cool. Safety first!
  2. Locate the transmission fluid dipstick. It’s usually labeled and can be found near the back of the engine compartment.
  3. Using a clean rag or paper towel, wipe the dipstick clean.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level. The dipstick will have markings indicating the proper fluid level.
  5. If the fluid level is below the “Add” mark, it’s time to add some transmission fluid.
  6. Remove the transmission fluid fill plug, usually located on the side of the transmission. Use a funnel to avoid spills.
  7. Pour the appropriate amount of transmission fluid, according to the capacity table, into the fill plug hole.
  8. Replace the fill plug and tighten it securely.
  9. Start the engine and let it idle for a few minutes to warm up the transmission fluid.
  10. With the engine still running, repeat steps 3 to 5 to ensure the fluid level is within the proper range.
  11. Once you’re satisfied with the fluid level, you’re good to go! Take your truck for a spin and enjoy the smooth ride.

Remember, maintaining the proper transmission fluid level is crucial for the longevity and performance of your 2016 Ford F150. Regularly check the fluid level and change it as recommended by the manufacturer to keep your truck running at its best.

Now that you have all the information you need, go ahead and take care of your transmission fluid like a boss. Your truck will thank you for it!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top