2018 CRV Transmission Fluid Capacity: Everything You Need to Know

2018 CRV Transmission Fluid Capacity

When it comes to maintaining your 2018 CRV, one crucial aspect that often gets overlooked is the transmission fluid. Properly maintaining your transmission fluid can help ensure smooth gear shifts and extend the lifespan of your vehicle’s transmission. In this article, we will discuss the transmission fluid capacity for the 2018 CRV and provide you with all the information you need to keep your vehicle running smoothly.

Popular posts
What to do to prolong the life of your manual gearbox
Automatic transmission: what it is, how it works

Transmission Fluid Capacity and Type

Before we dive into the specifics, let’s first talk about the transmission fluid capacity for the 2018 CRV. The transmission fluid capacity for this model is approximately 3.4 quarts or 3.2 liters. It is important to note that this capacity may vary slightly depending on the specific trim level and any modifications made to the vehicle.

Now that you know the capacity, let’s move on to the type of transmission fluid you should use. Honda recommends using their Genuine Honda ATF DW-1 Automatic Transmission Fluid. This fluid is specifically formulated to meet the requirements of Honda vehicles, including the 2018 CRV. Using the correct fluid is crucial to ensure optimal performance and longevity of your transmission.

  2006 Honda Civic Transmission Fluid Capacity and Maintenance Guide

How to Check and Add Transmission Fluid

Checking and adding transmission fluid to your 2018 CRV is a relatively simple process. Here are the steps you need to follow:

  1. Park your vehicle on a level surface and engage the parking brake.
  2. Start the engine and let it idle for a few minutes to warm up the transmission fluid.
  3. Locate the transmission dipstick, which is usually labeled and located near the back of the engine compartment.
  4. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  5. Reinsert the dipstick fully and then remove it again to check the fluid level.
  6. The dipstick will have markings indicating the minimum and maximum fluid levels. Ensure that the fluid level is within this range. If it is below the minimum mark, you will need to add fluid.
  7. If you need to add fluid, use a funnel to pour the transmission fluid into the dipstick tube. Be careful not to overfill, as this can cause damage to the transmission.
  8. After adding fluid, recheck the level using the dipstick and add more if necessary.
  9. Once the fluid level is correct, securely reinsert the dipstick and close the hood.
  2011 Honda CRV Transmission Fluid Capacity: A Must-Know for Smooth Performance

Remember, it is essential to follow the instructions in your vehicle’s owner’s manual for checking and adding transmission fluid. If you are unsure or uncomfortable performing this task yourself, it is always best to consult a professional mechanic.

Conclusion

Now that you know the transmission fluid capacity for the 2018 CRV and how to check and add fluid, you can confidently maintain your vehicle’s transmission. Regularly checking and maintaining the proper fluid level will help ensure smooth gear shifts and extend the life of your transmission. Remember to always use the recommended transmission fluid for your vehicle, and if in doubt, consult a professional. Keep your CRV running smoothly and enjoy the road ahead!

Author

What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top