2020 Ram 2500 Transmission Fluid Capacity: Keeping Your Truck Running Smoothly

2020 Ram 2500 Transmission Fluid Capacity: How Much Fluid Does Your Truck Need?

If you’re a proud owner of a 2020 Ram 2500, you know that taking care of your truck is essential to keep it running smoothly. One crucial aspect of maintenance is ensuring that your transmission is properly lubricated with the right amount of fluid. In this article, we’ll dive into the transmission fluid capacity for your 2020 Ram 2500 and provide you with all the information you need.

Transmission Fluid Capacity and Type

To determine the transmission fluid capacity for your 2020 Ram 2500, you need to know which transmission your truck is equipped with. The two options available are the 6-speed automatic transmission (68RFE) and the 8-speed automatic transmission (8HP75).

For the 6-speed automatic transmission (68RFE), the fluid capacity is approximately 17.5 quarts or 16.6 liters. This transmission requires ATF+4 transmission fluid, which is specifically designed for Chrysler vehicles. It is important to use the recommended fluid to ensure optimal performance and longevity of your transmission.

On the other hand, if your 2020 Ram 2500 is equipped with the 8-speed automatic transmission (8HP75), the fluid capacity is approximately 14.8 quarts or 14 liters. This transmission also requires ATF+4 transmission fluid.

How to Check and Add Transmission Fluid

Checking and adding transmission fluid to your 2020 Ram 2500 is a relatively straightforward process. Here’s a step-by-step guide to help you:

  1. Park your truck on a level surface and engage the parking brake.
  2. Locate the transmission dipstick, which is usually labeled and located near the back of the engine bay.
  3. With the engine warmed up and running, pull out the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then pull it out again to check the fluid level. The dipstick will have markings indicating the proper fluid level range.
  5. If the fluid level is below the recommended range, you’ll need to add fluid. Use a funnel to pour the fluid into the dipstick tube. Be careful not to overfill.
  6. Recheck the fluid level using the dipstick and add more fluid if necessary.
  7. Once the fluid level is within the recommended range, securely reinsert the dipstick.

Remember, safety is crucial when working with your vehicle. Always refer to your owner’s manual for specific instructions and precautions related to checking and adding transmission fluid.

In Conclusion

Knowing the transmission fluid capacity for your 2020 Ram 2500 is vital to maintain the health of your transmission. Whether you have the 6-speed automatic transmission (68RFE) or the 8-speed automatic transmission (8HP75), make sure to use the recommended ATF+4 transmission fluid and follow the proper procedures for checking and adding fluid.

By taking care of your truck’s transmission, you can ensure that it continues to perform at its best and provide you with a reliable driving experience. So, don’t overlook this essential maintenance task and keep your 2020 Ram 2500 running smoothly for years to come.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top