4L60E Transmission Fluid Change: Capacity and Steps

4L60E Transmission Fluid Change Capacity

When it comes to maintaining your vehicle’s transmission, one important task is changing the fluid regularly. The 4L60E transmission is a popular choice in many vehicles, known for its durability and smooth shifting. In this article, we will discuss the fluid change capacity for the 4L60E transmission, providing you with the information you need to keep your transmission running smoothly.

Transmission Fluid Capacity and Type

Before we dive into the process of changing the transmission fluid, let’s first talk about the capacity and type of fluid you’ll need. The 4L60E transmission typically requires around 11 quarts or 10.4 liters of transmission fluid for a complete fluid change.

Transmission Fluid Capacity Quarts Liters
4L60E Transmission 11 10.4

It’s crucial to use the correct type of transmission fluid for your 4L60E transmission. Always refer to your vehicle’s owner manual or consult a professional to ensure you’re using the right fluid. Using the wrong fluid can lead to serious damage to your transmission, and we don’t want that.

  350 Turbo Transmission Fluid Capacity: Everything You Need to Know

Changing the Transmission Fluid

Now that you know the fluid capacity and type, let’s discuss the process of changing the transmission fluid in your 4L60E transmission. Here are the steps you need to follow:

  1. Make sure your vehicle is parked on a level surface and the engine is turned off.
  2. Locate the transmission fluid pan underneath your vehicle. It’s usually a rectangular-shaped pan towards the rear of the transmission.
  3. Place a drain pan underneath the transmission fluid pan to catch the old fluid.
  4. Remove the bolts securing the transmission fluid pan and carefully lower it to allow the fluid to drain completely.
  5. Once all the fluid has drained, clean the pan and the magnet inside it. The magnet collects any metal debris that may have accumulated.
  6. Replace the transmission fluid filter, which is usually located inside the pan. Make sure to install the new filter correctly.
  7. Reinstall the transmission fluid pan, ensuring it’s properly sealed. Tighten the bolts securely.
  8. Locate the transmission fluid dipstick and remove it.
  9. Using a funnel, add the new transmission fluid to the appropriate level. Refer to your vehicle’s manual for the correct fluid level.
  10. Replace the transmission fluid dipstick and start the engine. Let it run for a few minutes to allow the fluid to circulate.
  11. Check the fluid level again and add more if necessary.
  2018 GMC Sierra Transmission Fluid Capacity: A Guide to Maintenance

Remember, safety is crucial when working on your vehicle. Always wear protective gloves and eyewear, and exercise caution when working underneath the vehicle. If you’re not confident in performing the fluid change yourself, it’s best to seek the assistance of a professional.

By following these steps and using the correct fluid capacity and type, you can ensure that your 4L60E transmission remains in good condition. Regular fluid changes are essential for maintaining the longevity and performance of your transmission. Don’t neglect this important maintenance task, and your transmission will thank you with smooth shifts and reliable performance.

Author

What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top