Tacoma Transmission Fluid Capacity: A Guide to Maintaining Your Vehicle

Tacoma Transmission Fluid Capacity

When it comes to maintaining your Tacoma’s transmission, one important factor to consider is the fluid capacity. Having the right amount of transmission fluid is crucial for the smooth operation and longevity of your vehicle. In this article, we will provide you with all the information you need about Tacoma transmission fluid capacity.

Popular posts
What to do to prolong the life of your manual gearbox
Automatic transmission: what it is, how it works

Transmission Fluid Capacity and Type

Before we dive into the details, let’s start with the basics. The transmission fluid capacity of a Tacoma can vary depending on the model year and engine type. It’s essential to know the correct capacity to ensure you’re adding the right amount of fluid. Here’s a table that outlines the transmission fluid capacity for different Tacoma models:

Tacoma Model Transmission Fluid Capacity (Quarts) Transmission Fluid Capacity (Liters)
Tacoma 2.7L 4-Cylinder 5.7 5.4
Tacoma 3.5L V6 6.9 6.5

Now that you know the correct transmission fluid capacity for your Tacoma, let’s talk about the type of fluid you should use. Toyota recommends using Genuine Toyota ATF WS (World Standard) transmission fluid for most Tacoma models. It’s important to stick to the manufacturer’s recommendations to ensure optimal performance and avoid potential damage to your transmission.

  2015 Camry Transmission Fluid Capacity: Everything You Need to Know

How to Check and Add Transmission Fluid

Checking and adding transmission fluid to your Tacoma is a relatively straightforward process. Here are the steps you need to follow:

  1. Park your Tacoma on a level surface and engage the parking brake.
  2. Locate the transmission fluid dipstick, which is usually labeled and located near the back of the engine bay.
  3. With the engine warmed up and running, remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level. The dipstick will have markings indicating the appropriate range for the fluid level.
  5. If the fluid level is below the “Add” mark, you’ll need to add transmission fluid. Use a funnel to pour the fluid into the dipstick tube. Be careful not to overfill.
  6. Recheck the fluid level using the dipstick and add more fluid if necessary. Repeat this process until the fluid level is within the recommended range.
  7. Once you’re done, securely reinsert the dipstick and close the hood.
  2014 Tundra Transmission Fluid Capacity: A Crucial Maintenance Guide

Remember, it’s crucial to follow the proper safety precautions when working with transmission fluid. Avoid contact with your skin or eyes, and dispose of used fluid responsibly.


Knowing the correct transmission fluid capacity for your Tacoma is essential for maintaining the health of your vehicle’s transmission. By following the guidelines provided in this article, you can ensure that you’re adding the right amount of fluid and using the recommended type. Regularly checking and maintaining the transmission fluid level will contribute to the smooth operation and longevity of your Tacoma.


What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top