2006 Jeep Commander 3.7 Transmission Fluid Capacity: Blunt and Straightforward Guide

2006 Jeep Commander 3.7 Transmission Fluid Capacity

If you’re a proud owner of a 2006 Jeep Commander 3.7, you might find yourself in need of some information about its transmission fluid capacity. Well, you’ve come to the right place! In this article, we’ll provide you with all the blunt and straightforward details you need, without any sugarcoating. So, let’s get down to business!

Transmission Fluid Capacity and Type

When it comes to the transmission fluid capacity of your 2006 Jeep Commander 3.7, you’ll be pleased to know that it’s not a complicated affair. The transmission fluid capacity for this model is approximately 4.7 quarts or 4.4 liters. That’s all you need to keep your transmission running smoothly.

Now, let’s talk about the type of transmission fluid you should use. It’s crucial to use the right type to ensure optimal performance and longevity of your transmission. For the 2006 Jeep Commander 3.7, you should use ATF+4 transmission fluid. Don’t even think about using anything else, as it can lead to serious damage and costly repairs. Stick to ATF+4, and you’ll be just fine.

  2003 Jeep Wrangler Transmission Fluid Capacity: All You Need to Know

How to Check and Add Transmission Fluid

Checking and adding transmission fluid is a relatively simple process, but it’s important to follow the correct steps to avoid any mishaps. Here’s a straightforward guide to help you out:

  1. Park your Jeep Commander on a level surface and engage the parking brake. Safety first!
  2. Locate the transmission dipstick, which is usually labeled and has a distinctive handle.
  3. With the engine warmed up and running, pull out the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then pull it out again to check the fluid level. The dipstick will have markings indicating the proper range for the fluid level.
  5. If the fluid level is below the “Add” or “Min” mark, it’s time to add some transmission fluid.
  6. Remove the transmission fill plug, which is located on the side of the transmission case.
  7. Using a funnel, carefully pour the ATF+4 transmission fluid into the fill plug opening. Take your time and avoid any spills.
  8. Check the fluid level again using the dipstick, and add more fluid if necessary.
  9. Once you’re satisfied with the fluid level, securely reinsert the dipstick and tighten the fill plug.
  2011 Jeep Compass Transmission Fluid Capacity: A Guide for Proper Maintenance

Remember, safety is crucial throughout this process. Avoid contact with the hot engine or moving parts, and always use caution when working under your vehicle.


There you have it, all the blunt and straightforward information you need about the 2006 Jeep Commander 3.7 transmission fluid capacity. With approximately 4.7 quarts or 4.4 liters of ATF+4 transmission fluid, you’ll keep your transmission running smoothly and avoid any unnecessary headaches. Just follow the steps we’ve provided for checking and adding transmission fluid, and you’ll be good to go. Stay safe and happy driving!


What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top