2008 FJ Cruiser Transmission Fluid Capacity: A Crucial Maintenance Guide

2008 FJ Cruiser Transmission Fluid Capacity

When it comes to maintaining your 2008 FJ Cruiser, one important aspect that often gets overlooked is the transmission fluid. Neglecting this vital fluid can lead to serious problems down the road, so it’s crucial to know the correct capacity and type for your vehicle. In this article, we’ll provide you with all the information you need to keep your transmission running smoothly.

Transmission Fluid Capacity and Type

Before we dive into the specifics, let’s get straight to the point. The 2008 FJ Cruiser requires approximately 10.1 quarts or 9.6 liters of transmission fluid. Now, let’s talk about the type of fluid you should be using.

The recommended transmission fluid for the 2008 FJ Cruiser is Toyota Genuine ATF WS. This fluid is specifically designed to meet the requirements of your vehicle’s transmission system, ensuring optimal performance and longevity. Using any other type of fluid may result in damage to your transmission, so don’t take any chances.

How to Check and Add Transmission Fluid

Checking and adding transmission fluid is a relatively simple process, but it’s important to follow the correct steps to ensure accuracy. Here’s what you need to do:

  1. Park your FJ Cruiser on a level surface and engage the parking brake.
  2. Start the engine and let it idle for a few minutes to warm up the transmission.
  3. Locate the transmission dipstick, which is typically labeled and located near the back of the engine compartment.
  4. Remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  5. Reinsert the dipstick fully and then remove it again to check the fluid level. The dipstick will have markings indicating the minimum and maximum levels.
  6. If the fluid level is below the minimum mark, you’ll need to add fluid. Use a funnel to pour the recommended Toyota Genuine ATF WS fluid into the transmission through the dipstick tube. Be careful not to overfill.
  7. Recheck the fluid level using the dipstick and add more fluid if necessary.
  8. Once the fluid level is within the acceptable range, securely reinsert the dipstick.

It’s important to note that adding too much fluid can be just as harmful as having too little. Overfilling can lead to foaming, overheating, and damage to the transmission. So, be cautious and ensure you’re adding the correct amount.


Now that you know the transmission fluid capacity and type for your 2008 FJ Cruiser, you can confidently maintain your vehicle’s transmission system. Remember, using the recommended Toyota Genuine ATF WS fluid and regularly checking and adding fluid when necessary will help ensure smooth shifting and extend the life of your transmission. Don’t neglect this essential maintenance task, and your FJ Cruiser will thank you with reliable performance for years to come.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top