2012 Ram 3500 Transmission Fluid Capacity: Blunt and Straightforward Guide

2012 Ram 3500 Transmission Fluid Capacity

Popular posts
What to do to prolong the life of your manual gearbox
Automatic transmission: what it is, how it works


If you own a 2012 Ram 3500, it’s important to know the transmission fluid capacity to ensure proper maintenance and performance of your vehicle. In this article, we’ll provide you with the blunt and straightforward information you need, without any unnecessary sugarcoating. So, let’s get right into it!

Transmission Fluid Capacity and Type

To determine the transmission fluid capacity for your 2012 Ram 3500, refer to the table below:

Transmission Type Fluid Capacity (Quarts) Fluid Capacity (Liters)
6-Speed Automatic (68RFE) 17 Quarts 16 Liters
6-Speed Manual (G56) 4.5 Quarts 4.3 Liters

Transmission Fluid Replacement

Now that you know the transmission fluid capacity for your Ram 3500, you might be wondering how to replace it. Here’s a step-by-step guide:

  1. Ensure your vehicle is parked on a level surface and the engine is turned off.
  2. Locate the transmission fluid dipstick, which is usually labeled and located near the engine bay.
  3. Using a funnel, remove the dipstick and set it aside.
  4. Using the appropriate tools, loosen the transmission pan bolts and carefully remove the pan to drain the old fluid.
  5. Allow the fluid to drain completely into a suitable container.
  6. Once drained, clean the transmission pan and replace the gasket or seal if necessary.
  7. Reinstall the pan and tighten the bolts securely.
  8. Using the funnel, pour the recommended amount of transmission fluid into the dipstick tube.
  9. Check the fluid level using the dipstick, ensuring it falls within the acceptable range.
  10. If needed, add more fluid gradually until the correct level is reached.
  11. Replace the dipstick and close the hood.
  2005 Ram 1500 Transmission Fluid Capacity: Know Your Truck's Needs

Safety Considerations

When performing any maintenance on your vehicle, including transmission fluid replacement, it’s crucial to prioritize safety. Here are a few safety considerations to keep in mind:

  • Always wear protective gloves and eyewear to prevent any potential injuries.
  • Ensure the vehicle is securely parked and the parking brake is engaged.
  • Allow the engine and transmission to cool down before starting the fluid replacement process.
  • Use caution when working with hot fluids and avoid any direct contact.
  • Dispose of the old transmission fluid properly, following local regulations and guidelines.


Now that you have the blunt and straightforward information about the 2012 Ram 3500 transmission fluid capacity, you can confidently maintain your vehicle’s transmission. Remember to always refer to your vehicle’s manual for specific instructions and consult a professional if you’re unsure about any aspect of the process. Stay safe and keep your Ram 3500 running smoothly!

  2006 Ram 1500 Transmission Fluid Capacity: Know Your Numbers


What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top