2014 Ram 1500 Transmission Fluid Capacity: A Blunt Guide to Maintenance

2014 Ram 1500 Transmission Fluid Capacity


If you own a 2014 Ram 1500, it’s important to know the transmission fluid capacity to ensure proper maintenance and performance of your vehicle. In this article, we’ll provide you with the blunt and straightforward information you need, without any unnecessary sugarcoating.

Transmission Fluid Capacity and Type

To keep your Ram 1500 running smoothly, you need to know the right amount and type of transmission fluid to use. Here’s a table that outlines the transmission fluid capacity in both quarts and liters:

Transmission Fluid Capacity Quarts Liters
5-Speed Automatic 14.0 13.2
6-Speed Automatic 13.0 12.3
8-Speed Automatic 18.0 17.0

How to Check and Add Transmission Fluid

If you’re experiencing any transmission issues or simply want to ensure your fluid levels are correct, here’s a step-by-step guide on how to check and add transmission fluid to your 2014 Ram 1500:

  1. Start by parking your vehicle on a level surface and engaging the parking brake.
  2. Locate the transmission fluid dipstick, which is usually labeled and located near the engine.
  3. With the engine warmed up and running, remove the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and then remove it again to check the fluid level. The dipstick will have indicators to show the minimum and maximum levels.
  5. If the fluid level is below the minimum mark, you’ll need to add transmission fluid. Refer to your owner’s manual for the recommended type of fluid.
  6. Using a funnel, carefully pour the transmission fluid into the dipstick tube. Add small amounts at a time and recheck the fluid level until it reaches the appropriate range.
  7. Be cautious not to overfill the transmission, as it can lead to damage.
  8. Once you’ve reached the correct fluid level, securely reinsert the dipstick and ensure it is properly seated.

Safety Precautions

While checking and adding transmission fluid is a relatively simple task, it’s important to prioritize safety. Here are a few crucial safety precautions to keep in mind:

  • Always work in a well-ventilated area to avoid inhaling any fumes.
  • Ensure the engine is turned off and cool before attempting to check or add transmission fluid.
  • Use caution when working around hot engine components to prevent burns.
  • Wear protective gloves and eyewear to protect yourself from any potential spills or splashes.


Knowing the transmission fluid capacity for your 2014 Ram 1500 is essential for maintaining its performance and longevity. By following the steps outlined in this article and taking the necessary safety precautions, you can confidently check and add transmission fluid to keep your vehicle running smoothly. Remember, it’s better to be blunt and straightforward when it comes to vehicle maintenance, so you have all the information you need without any unnecessary fluff.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top