2015 Honda Civic Automatic Transmission Fluid Capacity Guide

2015 Honda Civic Automatic Transmission Fluid Capacity

If you’re a proud owner of a 2015 Honda Civic and you’re wondering about the automatic transmission fluid capacity, you’ve come to the right place. In this article, we’ll provide you with all the blunt and straightforward information you need, without any sugarcoating. So, let’s get straight to the point!

Transmission Fluid Capacity

The 2015 Honda Civic with an automatic transmission requires approximately 3.9 quarts or 3.7 liters of transmission fluid. This is the amount you’ll need for a complete fluid change, including draining the old fluid and refilling with fresh fluid.

Transmission Fluid Type

Now that you know the capacity, let’s talk about the type of transmission fluid you should use. Honda recommends using their own Genuine Honda ATF DW-1 fluid for the 2015 Civic’s automatic transmission. This fluid is specifically formulated to meet the requirements of Honda vehicles and provide optimal performance and longevity.

Transmission Fluid Change

If you’re planning to change the transmission fluid in your 2015 Honda Civic, here are the steps you need to follow:

  1. Make sure the engine is cool before you begin. Safety first!
  2. Locate the transmission fluid dipstick, which is usually labeled and located near the back of the engine bay.
  3. Using a funnel, remove the dipstick and set it aside.
  4. Prepare a drain pan to collect the old fluid.
  5. Underneath the vehicle, locate the transmission drain plug. It’s usually located on the bottom of the transmission case.
  6. Place the drain pan underneath the drain plug and carefully remove the plug using a wrench or socket.
  7. Allow the old fluid to drain completely into the pan.
  8. Once the fluid has drained, reinstall the drain plug and tighten it securely.
  9. Now it’s time to refill the transmission with fresh fluid. Use the recommended Genuine Honda ATF DW-1 fluid and pour it into the transmission through the dipstick tube.
  10. Check the fluid level using the dipstick. Add more fluid if necessary, but be careful not to overfill.
  11. Replace the dipstick and ensure it is securely in place.
  12. Start the engine and let it idle for a few minutes to allow the new fluid to circulate.
  13. Finally, check the fluid level again and make any adjustments if needed.

Conclusion

Now that you have all the information you need about the 2015 Honda Civic’s automatic transmission fluid capacity, you can confidently tackle the task of changing the fluid. Just remember to use the recommended Genuine Honda ATF DW-1 fluid and follow the steps we’ve provided. Stay safe and enjoy smooth shifting in your Honda Civic!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top