2016 Ford Escape Transmission Fluid Capacity: A Guide to Maintaining Your Vehicle

2016 Ford Escape Transmission Fluid Capacity

When it comes to maintaining your 2016 Ford Escape, one of the essential tasks is checking and changing the transmission fluid. The transmission fluid plays a crucial role in keeping your vehicle’s transmission system running smoothly. In this article, we will discuss the transmission fluid capacity for the 2016 Ford Escape, providing you with the information you need to keep your vehicle in top shape.

Transmission Fluid Capacity and Type

Before we dive into the details, let’s take a look at the transmission fluid capacity for the 2016 Ford Escape. The table below provides the fluid capacity in both quarts and liters:

Transmission Fluid Capacity Quarts Liters
6F35 6-speed automatic transmission 9.5 quarts 9 liters

The 2016 Ford Escape is equipped with a 6F35 6-speed automatic transmission, which requires approximately 9.5 quarts or 9 liters of transmission fluid for a complete fluid change. It is important to note that these values are approximate and may vary slightly depending on the specific model and configuration of your vehicle.

Changing the Transmission Fluid

Now that you know the transmission fluid capacity for your 2016 Ford Escape, let’s discuss the process of changing the transmission fluid. Please keep in mind that working with transmission fluid can be hazardous, so it is crucial to follow safety precautions and consult your vehicle’s owner’s manual for detailed instructions.

  1. Start by parking your vehicle on a level surface and engaging the parking brake.
  2. Locate the transmission fluid dipstick, usually marked with a yellow handle, under the hood of your vehicle.
  3. Using a clean cloth or paper towel, remove the dipstick and wipe it clean.
  4. Reinsert the dipstick fully and remove it again to check the fluid level. Ensure that the fluid is within the recommended range.
  5. If the fluid appears dirty or has a burnt smell, it is time to change it. Consult your owner’s manual for the recommended type of transmission fluid for your vehicle.
  6. Using a suitable fluid pump, drain the old transmission fluid from the transmission pan. Be cautious as the fluid may be hot.
  7. Once the old fluid is drained, reinstall the transmission pan and tighten the bolts to the specified torque.
  8. Refill the transmission with the appropriate amount of new transmission fluid, considering the capacity mentioned in the table above.
  9. Recheck the fluid level using the dipstick and add more fluid if necessary.
  10. Finally, start your vehicle and allow it to idle for a few minutes. Shift through all the gears and recheck the fluid level once more.
  2013 Ford F150 5.0 Transmission Fluid Capacity: A Must-Know for Proper Maintenance

Remember, it is crucial to dispose of the old transmission fluid properly. Contact your local recycling center or automotive service provider for guidance on how to dispose of it safely.

By following these steps and using the correct transmission fluid capacity, you can ensure that your 2016 Ford Escape’s transmission system operates smoothly and efficiently. Regular maintenance and fluid changes will help prolong the life of your vehicle and provide you with a more enjoyable driving experience.


What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top