2016 GMC Yukon Transmission Fluid Capacity: A Guide to Proper Maintenance

2016 GMC Yukon Transmission Fluid Capacity

When it comes to maintaining your 2016 GMC Yukon, one crucial aspect that often gets overlooked is the transmission fluid. The transmission fluid plays a vital role in keeping your vehicle’s transmission running smoothly and efficiently. In this article, we will discuss the transmission fluid capacity for the 2016 GMC Yukon, so you can ensure you have the right amount of fluid to keep your vehicle performing at its best.

Transmission Fluid Capacity and Type

Before we dive into the details, let’s take a look at the transmission fluid capacity and type for the 2016 GMC Yukon. It’s important to use the correct fluid and fill it to the appropriate level to avoid any potential issues. Here’s a handy table to guide you:

Transmission Fluid Capacity Transmission Fluid Type
6L80 Transmission: 12 quarts (11.4 liters) Dexron VI Automatic Transmission Fluid
8L90 Transmission: 12.5 quarts (11.8 liters) Dexron VI Automatic Transmission Fluid

Now that we have the numbers out of the way, let’s discuss how to properly check and fill the transmission fluid in your 2016 GMC Yukon.

Checking and Filling Transmission Fluid

  1. Make sure your vehicle is parked on a level surface and the engine is warmed up.
  2. Locate the transmission dipstick, which is usually labeled and located near the back of the engine bay.
  3. With the engine running and the transmission in “Park” or “Neutral,” pull out the dipstick and wipe it clean with a lint-free cloth or paper towel.
  4. Reinsert the dipstick fully and pull it out again to check the fluid level. The dipstick will have markings indicating the proper fluid level range.
  5. If the fluid level is below the “Add” or “Min” mark, you will need to add transmission fluid.
  6. Remove the transmission fill plug, which is typically located on the side of the transmission case.
  7. Using a funnel, carefully pour the appropriate amount of Dexron VI Automatic Transmission Fluid into the fill plug opening.
  8. Check the fluid level again using the dipstick, and add more fluid if necessary.
  9. Once the fluid level is within the proper range, securely reinsert the dipstick and tighten the fill plug.

Remember, it’s crucial to use the correct type of transmission fluid and fill it to the recommended capacity. Using the wrong fluid or overfilling can lead to transmission problems and potentially costly repairs.

Now that you know the transmission fluid capacity for your 2016 GMC Yukon and how to properly check and fill it, you can ensure your vehicle’s transmission stays in top shape. Regular maintenance and attention to fluid levels will help prolong the life of your transmission and keep your Yukon running smoothly on the road.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top