Jeep TJ Manual Transmission Fluid Capacity: A Guide to Proper Maintenance

Jeep TJ Manual Transmission Fluid Capacity

When it comes to maintaining your Jeep TJ’s manual transmission, one important aspect to consider is the fluid capacity. Knowing the correct amount of transmission fluid to use is crucial for optimal performance and longevity of your vehicle. In this article, we will provide you with the necessary information on the Jeep TJ manual transmission fluid capacity, so you can keep your Jeep running smoothly.

Transmission Fluid Capacity and Type

Before we dive into the specifics, let’s take a look at the transmission fluid capacity for the Jeep TJ manual transmission. The table below provides the fluid capacity in both quarts and liters:

Transmission Fluid Capacity Quarts Liters
AX-5 Manual Transmission 3.25 quarts 3.07 liters
NV3550 Manual Transmission 4.0 quarts 3.78 liters

Now that you know the fluid capacity, let’s discuss the type of transmission fluid you should use for your Jeep TJ. It is crucial to use the correct fluid to ensure proper lubrication and performance. Here are the recommended transmission fluids for the respective manual transmissions:

  • AX-5 Manual Transmission: Use Mopar Manual Transmission Lubricant or an equivalent SAE 75W-90 API GL-3 gear oil.
  • NV3550 Manual Transmission: Use Mopar Manual Transmission Lubricant or an equivalent SAE 10W-30 API GL-4 gear oil.
  2007 Jeep Compass CVT Transmission Fluid Capacity: A Blunt Guide

It is essential to follow these recommendations to maintain the integrity of your transmission and avoid potential issues down the road.

Fluid Replacement Procedure

If you are planning to replace the transmission fluid in your Jeep TJ’s manual transmission, here is a step-by-step guide to help you through the process:

  1. Ensure your Jeep is parked on a level surface and the engine is turned off.
  2. Locate the transmission fluid drain plug underneath the transmission. It is usually a large bolt.
  3. Place a drain pan underneath the drain plug to catch the old fluid.
  4. Remove the drain plug using the appropriate size wrench or socket.
  5. Allow the old fluid to drain completely into the drain pan.
  6. Once drained, reinstall the drain plug and tighten it securely.
  7. Locate the transmission fluid fill plug, which is typically located on the side of the transmission.
  8. Remove the fill plug using the appropriate size wrench or socket.
  9. Using a fluid pump or a funnel, carefully add the recommended amount of transmission fluid into the fill hole.
  10. Once filled, reinstall the fill plug and tighten it securely.
  11. Double-check for any leaks around the drain and fill plugs.
  2012 Jeep Compass CVT Transmission Fluid Capacity: A Guide for Proper Maintenance

Following these steps will ensure a proper transmission fluid replacement for your Jeep TJ’s manual transmission.

Conclusion

Knowing the correct transmission fluid capacity for your Jeep TJ’s manual transmission is essential for maintaining its performance and longevity. By following the recommended fluid capacity and type, as well as the proper fluid replacement procedure, you can keep your Jeep running smoothly on and off the road. Remember to always consult your owner’s manual or a certified mechanic if you have any doubts or concerns. Now, go ahead and give your Jeep TJ the care it deserves!

Author

What Color Should Transmission Fluid Be?

What Color Should Transmission Fluid Be?

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top